关于android:Android-OTA升级一之Makefile文件分析

45次阅读

共计 17684 个字符，预计需要花费 45 分钟才能阅读完成。

转载

概要：

此篇文章次要介绍 Android ota 包（Android L）的编译制作过程，侧重于 Makefile 中编译 ota 的流程，从指定 target 到编译 cmd 等流程。

次要流程：

源码剖析：

build/core/Makefile：

.PHONY: otapackage
otapackage: $(INTERNAL_OTA_PACKAGE_TARGET)

otapackage 伪命令，即执行 make otapackage 时，将编译 $(INTERNAL_OTA_PACKAGE_TARGET) 指标

$(INTERNAL_OTA_PACKAGE_TARGET): $(BUILT_TARGET_FILES_PACKAGE) $(DISTTOOLS)
    @echo "Package OTA: $@"
ifneq ($(TARGET_USERIMAGES_USE_UBIFS),true)
  ifeq (yes, $(filter $(TRUSTONIC_TEE_SUPPORT) $(MTK_ATF_SUPPORT),yes))
      $(hide) MTK_SECURITY_SW_SUPPORT=$(MTK_SECURITY_SW_SUPPORT) MKBOOTIMG=$(MKBOOTIMG) \
         ./build/tools/releasetools/ota_from_target_files -v \
         --block \
         -p $(HOST_OUT) \
         -k $(KEY_CERT_PAIR) \
         -z $(PRODUCT_OUT)/trustzone.bin \
         $(if $(OEM_OTA_CONFIG), -o $(OEM_OTA_CONFIG)) \
         $(BUILT_TARGET_FILES_PACKAGE) $@
  else
      $(hide) MTK_SECURITY_SW_SUPPORT=$(MTK_SECURITY_SW_SUPPORT) MKBOOTIMG=$(MKBOOTIMG) \
         ./build/tools/releasetools/ota_from_target_files -v \
         --block \
         -p $(HOST_OUT) \
         -k $(KEY_CERT_PAIR) \
         $(if $(OEM_OTA_CONFIG), -o $(OEM_OTA_CONFIG)) \
         $(BUILT_TARGET_FILES_PACKAGE) $@
  endif
else
    $(hide) MTK_SECURITY_SW_SUPPORT=$(MTK_SECURITY_SW_SUPPORT) ./build/tools/releasetools/ota_from_target_files -v \
       -n \
       -g \
       -p $(HOST_OUT) \
       -k $(KEY_CERT_PAIR) \
       $(BUILT_TARGET_FILES_PACKAGE) $@
endif
ifeq ($(strip $(MTK_FW_UPGRADE)), yes)
#    @echo "Package FWUpgradePackage"
#    bash $(FWUPGRADEPACKAGE_SH) $(PRODUCT_OUT) $(KEY_CERT_PAIR)
endif

依赖两局部：

$(BUILT_TARGET_FILES_PACKAGE)$(DISTTOOLS)

而后先找$(BUILT_TARGET_FILES_PACKAGE)。BUILT_TARGET_FILES_PACKAGE:= (intermediates)/(intermediates)/(intermediates)/(name).zip 理论为：full_p92s_hd-target_files-eng.wan.zip

# -----------------------------------------------------------------
# A zip of the directories that map to the target filesystem.
# This zip can be used to create an OTA package or filesystem image
# as a post-build step.
#
name := $(TARGET_PRODUCT)
ifeq ($(TARGET_BUILD_TYPE),debug)
  name := $(name)_debug
endif
name := $(name)-target_files-$(FILE_NAME_TAG)

以上这些步骤次要确定 name 变量名称 name:=(project−name)−targetfiles−(project-name)-target_files-(project−name)−targetfiles−(FILE_NAME_TAG) , 假如 project-name=p92 FILE_NAME_TAG=eng , 则：

name := p92-target_files-eng
intermediates := $(call intermediates-dir-for,PACKAGING,target_files)

此处调用了一个函数：intermediates-dir-for，咱们来解读一下它的定义，就晓得这句话的意思了。它定义在build/core/definitions.mk 中，如下：

 $(1): target class, like "APPS"
 $(2): target name, like "NotePad"
 $(3): if non-empty, this is a HOST target.
 $(4): if non-empty, force the intermediates to be COMMON
 $(5): if non-empty, force the intermedistes to be for the 2ndarch
define intermediates-dir-for
$(strip \
    $(eval _idfClass :=$(strip $(1))) \
    $(if $(_idfClass),, \
        $(error$(LOCAL_PATH): Class not defined in call to intermediates-dir-for)) \
    $(eval _idfName :=$(strip $(2))) \
    $(if $(_idfName),, \
        $(error$(LOCAL_PATH): Name not defined in call to intermediates-dir-for)) \
    $(eval _idfPrefix :=$(if $(strip $(3)),HOST,TARGET)) \
    $(eval_idf2ndArchPrefix := $(if $(strip $(5)),$(TARGET_2ND_ARCH_VAR_PREFIX))) \
    $(if $(filter$(_idfPrefix)-$(_idfClass),$(COMMON_MODULE_CLASSES))$(4), \
        $(eval _idfIntBase:= $($(_idfPrefix)_OUT_COMMON_INTERMEDIATES)) \
      ,$(if $(filter$(_idfClass),SHARED_LIBRARIES STATIC_LIBRARIES EXECUTABLES GYP),\
          $(eval_idfIntBase := $($(_idf2ndArchPrefix)$(_idfPrefix)_OUT_INTERMEDIATES)) \
       ,$(eval _idfIntBase:= $($(_idfPrefix)_OUT_INTERMEDIATES)) \
       ) \
     ) \
   $(_idfIntBase)/$(_idfClass)/$(_idfName)_intermediates \
)
endif

传入的参数：$1= PACKAGING , $2=target-files, $3及当前的参数为空。

所以执行下来：

  - _idfClass := PACKAGING
  - _idfName := target_files
  - _idfPrefix := TARGET  (认为 $3 为空，所以 if 函数走到 else part 为 TARGET)
  - _idfIntBase := TARGET_OUT_INTERMEDIATES

因为这个宏在 build/core/envsetup.mk 中有定义：

TARGET_OUT_INTERMEDIATES := (PRODUCTOUT)/obj(out/target/product/(PRODUCT_OUT)/obj (out/target/product/(PRODUCTOUT)/obj(out/target/product/(project)/obj)

执行后果：

out/target/product/$(project)/obj/PACKAGING/target_files_intermediates

所以这个函数调用之后：intermediates := out/target/product/$(project)/obj/PACKAGING/target-files_intermeidates

BUILT_TARGET_FILES_PACKAGE := $(intermediates)/$(name).zip
$(BUILT_TARGET_FILES_PACKAGE): intermediates := $(intermediates)
$(BUILT_TARGET_FILES_PACKAGE): \
        zip_root := $(intermediates)/$(name)

以上几句同样是对指标等变量赋值：

BUILT_TARGET_FILES_PACKAGE := out/target/product/$(project)/obj/PACKAGING/target-files_intermeidates/p92-target_files-eng.zip (这个即是将要生成的指标文件)

而后设定两个指标指定变量：intermediates和zip_root，即这两个变量只在 BUILT_TARGET_FILES_PACKAGE 这个指标上下文无效（相似于 C 语言的局部变量）
Intermediates:= out/target/product/$(project)/obj/PACKAGING/target-files_intermeidates
zip_root := out/target/product/$(project)/obj/PACKAGING/target-files_intermeidates/p92-target_files-eng

# $(1): Directory to copy
# $(2): Location to copy it to
# The "ls -A" is to prevent "acp s/* d" from failing if s is empty.
define package_files-copy-root
  if [-d "$(strip $(1))" -a "$$(ls -A $(1))" ]; then \
    mkdir -p $(2) && \
    $(ACP) -rd $(strip $(1))/* $(2); \
  fi
endef

以上定义了一个 copy 文件的函数，有两个参数 $1,$2，把 $1 中的内容拷到 $2 中。

built_ota_tools := \
    $(call intermediates-dir-for,EXECUTABLES,applypatch)/applypatch \
    $(call intermediates-dir-for,EXECUTABLES,applypatch_static)/applypatch_static \
    $(call intermediates-dir-for,EXECUTABLES,check_prereq)/check_prereq \
    $(call intermediates-dir-for,EXECUTABLES,sqlite3)/sqlite3
ifeq ($(TARGET_ARCH),arm64)
  built_ota_tools += $(call intermediates-dir-for,EXECUTABLES,updater,,,t)/updater
else
  built_ota_tools += $(call intermediates-dir-for,EXECUTABLES,updater)/updater
endif

以上次要做两件事件：

  1. 把 applypatch … sqlite3 等可执行文件（obj/EXECUTABLES/…目录下）赋值给 built_ota_tools

  2. 把 updater 可执行文件追加赋值给 built_ota_tools。这里值得注意的是 updater 的调用参数：(EXECUTABLES,updater,,,t)，存在 $5 , 联合上文对 intermediates-dir-for 函数剖析可失去：

    $(eval_idfIntBase := ((((_idf2ndArchPrefix)$(_idfPrefix)_OUT_INTERMEDIATES))
  可失去：idfIntBase :=$(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATES:= $(PRODUCT_OUT)/obj_$(TARGET_2ND_ARCH) :=out/target/product/$(project)/obj_arm

所以最初返回：out/target/product/$(project)/obj_arm/updater_intermediates/(updater)

可发现调用 intermediates-dir-for 此函数，如果存在参数 $5，并且 _idfClass 在 SHARED_LIBRARIES STATIC_LIBRARIES EXECUTABLES GYP 中，则 idfIntBase := out/target/product/$(project)/obj_arm (而非 obj)。最终 built_ota_tools := applypatchapplypatch_static check_prereq sqlite3 updater 这几支文件（目录疏忽）

$(BUILT_TARGET_FILES_PACKAGE): PRIVATE_OTA_TOOLS := $(built_ota_tools)

$(BUILT_TARGET_FILES_PACKAGE): PRIVATE_RECOVERY_API_VERSION := $(RECOVERY_API_VERSION)
$(BUILT_TARGET_FILES_PACKAGE): PRIVATE_RECOVERY_FSTAB_VERSION := $(RECOVERY_FSTAB_VERSION)

ifeq ($(TARGET_RELEASETOOLS_EXTENSIONS),)
# default to common dir for device vendor
$(BUILT_TARGET_FILES_PACKAGE): tool_extensions := $(TARGET_DEVICE_DIR)/../common
else
$(BUILT_TARGET_FILES_PACKAGE): tool_extensions := $(TARGET_RELEASETOOLS_EXTENSIONS)
endif
  1. 把 built_ota_tools 赋值给指标制订变量 PRIVATE_OTA_TOOLS

  2. 别离对 PRIVATE_RECOVERY_API_VERSION, PRIVATE_RECOVERY_FSTAB_VERSION 赋值，其中 RECOVERY_API_VERSION , RECOVERY_FSTAB_VERSION 这两个变量在 bootable/recovery/Android.mk 中有定义：

    RECOVERY_API_VERSION:= 3
RECOVERY_FSTAB_VERSION:= 2
  3. 对 tool_extensions 赋值
# Depending on the various images guarantees that the underlying
# directories are up-to-date.
$(BUILT_TARGET_FILES_PACKAGE): \
        $(INSTALLED_BOOTIMAGE_TARGET) \
        $(INSTALLED_RADIOIMAGE_TARGET) \
        $(INSTALLED_RECOVERYIMAGE_TARGET) \
        $(INSTALLED_SYSTEMIMAGE) \
        $(INSTALLED_USERDATAIMAGE_TARGET) \
        $(INSTALLED_CACHEIMAGE_TARGET) \
        $(INSTALLED_VENDORIMAGE_TARGET) \
        $(INSTALLED_ANDROID_INFO_TXT_TARGET) \
        $(SELINUX_FC) \
        $(built_ota_tools) \
        $(APKCERTS_FILE) \
        $(HOST_OUT_EXECUTABLES)/fs_config \
        | $(ACP)

为指标添（out/…/obj/PACKAGING/ target-files_intermeidates/p92-target_files-eng.zip）加依赖，分为两种依赖，“|”前为一般依赖，即这些依赖 INSTALLED_BOOTIMAGE_TARGET 产生扭转，maketarget时指标也要从新构建；“|”后为 order-only 依赖，示意 ACP 这个变量若产生扭转，而 target 曾经存在时则不须要被重建，若第一次生成则须要重建。

ifeq ($(TARGET_USERIMAGES_USE_EXT4),true)
$(BUILT_TARGET_FILES_PACKAGE): $(INSTALLED_CACHEIMAGE_TARGET)
Endif

持续增加依赖 $(INSTALLED_CACHEIMAGE_TARGET)

@echo "Package target files: $@"
    $(hide) rm -rf $@ $(zip_root)
    $(hide) mkdir -p $(dir $@) $(zip_root)
    @# Components of the recovery image
    $(hide) mkdir -p $(zip_root)/RECOVERY
    $(hide) $(call package_files-copy-root, \
        $(TARGET_RECOVERY_ROOT_OUT),$(zip_root)/RECOVERY/RAMDISK)
ifdef INSTALLED_KERNEL_TARGET
    $(hide) $(ACP) $(INSTALLED_KERNEL_TARGET) $(zip_root)/RECOVERY/kernel
    $(hide) $(ACP) $(recovery_ramdisk) $(zip_root)/RECOVERY/ramdisk
ifeq ($(MTK_HEADER_SUPPORT),yes)
    $(hide) $(ACP) $(recovery_ramdisk_bthdr) $(zip_root)/RECOVERY/ramdisk-bthdr
endif
endif
ifdef INSTALLED_2NDBOOTLOADER_TARGET
    $(hide) $(ACP) \
        $(INSTALLED_2NDBOOTLOADER_TARGET) $(zip_root)/RECOVERY/second
endif
ifdef BOARD_KERNEL_CMDLINE
    $(hide) echo "$(BOARD_KERNEL_CMDLINE)" > $(zip_root)/RECOVERY/cmdline
endif
ifdef BOARD_KERNEL_BASE
    $(hide) echo "$(BOARD_KERNEL_BASE)" > $(zip_root)/RECOVERY/base
endif
ifdef BOARD_KERNEL_PAGESIZE
    $(hide) echo "$(BOARD_KERNEL_PAGESIZE)" > $(zip_root)/RECOVERY/pagesize
endif
ifdef BOARD_RAMDISK_OFFSET
    $(hide) echo "$(BOARD_RAMDISK_OFFSET)" > $(zip_root)/RECOVERY/ramdisk_offset
endif
ifdef BOARD_KERNEL_OFFSET
    $(hide) echo "$(BOARD_KERNEL_OFFSET)" > $(zip_root)/RECOVERY/kernel_offset
endif
ifdef BOARD_TAGS_OFFSET
    $(hide) echo "$(BOARD_TAGS_OFFSET)" > $(zip_root)/RECOVERY/tags_offset
endif
    $(hide) if [-f $(PRODUCT_OUT)/custom_build_verno ]; then \
              cat $(PRODUCT_OUT)/custom_build_verno > $(zip_root)/RECOVERY/board; \
            fi

    @# Components of the boot image
    $(hide) mkdir -p $(zip_root)/BOOT
    $(hide) $(call package_files-copy-root, \
        $(TARGET_ROOT_OUT),$(zip_root)/BOOT/RAMDISK)
ifdef INSTALLED_KERNEL_TARGET
    $(hide) $(ACP) $(INSTALLED_KERNEL_TARGET) $(zip_root)/BOOT/kernel
    $(hide) $(ACP) $(INSTALLED_RAMDISK_TARGET) $(zip_root)/BOOT/ramdisk
endif
ifdef INSTALLED_2NDBOOTLOADER_TARGET
    $(hide) $(ACP) \
        $(INSTALLED_2NDBOOTLOADER_TARGET) $(zip_root)/BOOT/second
endif
ifdef BOARD_KERNEL_CMDLINE
    $(hide) echo "$(BOARD_KERNEL_CMDLINE)" > $(zip_root)/BOOT/cmdline
endif
ifdef BOARD_KERNEL_BASE
    $(hide) echo "$(BOARD_KERNEL_BASE)" > $(zip_root)/BOOT/base
endif
ifdef BOARD_RAMDISK_OFFSET
    $(hide) echo "$(BOARD_RAMDISK_OFFSET)" > $(zip_root)/BOOT/ramdisk_offset
endif
ifdef BOARD_KERNEL_OFFSET
    $(hide) echo "$(BOARD_KERNEL_OFFSET)" > $(zip_root)/BOOT/kernel_offset
endif
ifdef BOARD_TAGS_OFFSET
    $(hide) echo "$(BOARD_TAGS_OFFSET)" > $(zip_root)/BOOT/tags_offset
endif
ifdef BOARD_KERNEL_PAGESIZE
    $(hide) echo "$(BOARD_KERNEL_PAGESIZE)" > $(zip_root)/BOOT/pagesize
endif

    $(hide) if [-f $(PRODUCT_OUT)/custom_build_verno ]; then \
              cat $(PRODUCT_OUT)/custom_build_verno > $(zip_root)/BOOT/board; \
            fi

    $(hide) $(foreach t,$(INSTALLED_RADIOIMAGE_TARGET),\
                mkdir -p $(zip_root)/RADIO; \
                $(ACP) $(t) $(zip_root)/RADIO/$(notdir $(t));)
    @# Contents of the system image
    $(hide) $(call package_files-copy-root, \
        $(SYSTEMIMAGE_SOURCE_DIR),$(zip_root)/SYSTEM)
    @# Contents of the data image
    $(hide) $(call package_files-copy-root, \
        $(TARGET_OUT_DATA),$(zip_root)/DATA)
    @# Contents of the apd image
    $(hide) $(call package_files-copy-root, \
        $(TARGET_OUT_APD),$(zip_root)/APD)
ifdef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE
    @# Contents of the vendor image
    $(hide) $(call package_files-copy-root, \
        $(TARGET_OUT_VENDOR),$(zip_root)/VENDOR)
endif
#wschen 2012-11-07
    $(if $(BOARD_CUSTOMIMAGE_PARTITION_SIZE), \
    $(hide) $(call package_files-copy-root, \
        $(TARGET_CUSTOM_OUT),$(zip_root)/CUSTOM))
    @# Extra contents of the OTA package
    $(hide) mkdir -p $(zip_root)/OTA/bin
    $(hide) $(ACP) $(INSTALLED_ANDROID_INFO_TXT_TARGET) $(zip_root)/OTA/
    $(hide) $(ACP) $(PRIVATE_OTA_TOOLS) $(zip_root)/OTA/bin/

下面内容次要是在 zip_root 目录下创立相应降级分区须要的目录，并把 out 目录下对应的文件 copy 到相应目录下。如果须要增加一个新分区到 ota 中，则须要在下面做一些批改，可参考 apd 分区。

@# Security information of the OTA package
    @echo "[SEC OTA] Adding Security information to OTA package"
    @echo "[SEC OTA] path : vendor/mediatek/proprietary/custom/$(MTK_BASE_PROJECT)/security/recovery/SEC_VER.txt"
    $(hide) $(ACP) vendor/mediatek/proprietary/custom/$(MTK_BASE_PROJECT)/security/recovery/SEC_VER.txt $(zip_root)/OTA/
    -$(hide) $(ACP) $(PRODUCT_OUT)/trustzone.bin $(zip_root)/OTA/
    @# Files that do not end up in any images, but are necessary to
    @# build them.
    $(hide) mkdir -p $(zip_root)/META
    $(hide) $(ACP) $(APKCERTS_FILE) $(zip_root)/META/apkcerts.txt
    $(hide) if test -e $(tool_extensions)/releasetools.py; then $(ACP) $(tool_extensions)/releasetools.py $(zip_root)/META/; fi
    $(hide)    echo "$(PRODUCT_OTA_PUBLIC_KEYS)" > $(zip_root)/META/otakeys.txt
    $(hide) echo "recovery_api_version=$(PRIVATE_RECOVERY_API_VERSION)" > $(zip_root)/META/misc_info.txt
    $(hide) echo "fstab_version=$(PRIVATE_RECOVERY_FSTAB_VERSION)" >> $(zip_root)/META/misc_info.txt
fdef BOARD_FLASH_BLOCK_SIZE
    $(hide) echo "blocksize=$(BOARD_FLASH_BLOCK_SIZE)" >> $(zip_root)/META/misc_info.txt
endif
ifdef BOARD_BOOTIMAGE_PARTITION_SIZE
    $(hide) echo "boot_size=$(BOARD_BOOTIMAGE_PARTITION_SIZE)" >> $(zip_root)/META/misc_info.txt
endif
ifdef BOARD_RECOVERYIMAGE_PARTITION_SIZE
    $(hide) echo "recovery_size=$(BOARD_RECOVERYIMAGE_PARTITION_SIZE)" >> $(zip_root)/META/misc_info.txt
endif
ifdef TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS
    @# TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS can be empty to indicate that nothing but defaults should be used.
    $(hide) echo "recovery_mount_options=$(TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS)" >> $(zip_root)/META/misc_info.txt
else
    $(hide) echo "recovery_mount_options=$(DEFAULT_TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS)" >> $(zip_root)/META/misc_info.txt
endif
    $(hide) echo "tool_extensions=$(tool_extensions)" >> $(zip_root)/META/misc_info.txt
    $(hide) echo "default_system_dev_certificate=$(DEFAULT_KEY_CERT_PAIR)" >> $(zip_root)/META/misc_info.txt
ifdef PRODUCT_EXTRA_RECOVERY_KEYS
    $(hide) echo "extra_recovery_keys=$(PRODUCT_EXTRA_RECOVERY_KEYS)" >> $(zip_root)/META/misc_info.txt
endif
    $(hide) echo 'mkbootimg_args=$(BOARD_MKBOOTIMG_ARGS)' >> $(zip_root)/META/misc_info.txt
    $(hide) echo "use_set_metadata=1" >> $(zip_root)/META/misc_info.txt
    $(hide) echo "multistage_support=1" >> $(zip_root)/META/misc_info.txt
    $(hide) echo "update_rename_support=1" >> $(zip_root)/META/misc_info.txt
    $(hide) echo "blockimgdiff_versions=1,2" >> $(zip_root)/META/misc_info.txt
ifeq ($(MTK_HEADER_SUPPORT),yes)
    $(hide) echo "mtk_header_support=1" >> $(zip_root)/META/misc_info.txt
endif
ifneq ($(OEM_THUMBPRINT_PROPERTIES),)
    # OTA scripts are only interested in fingerprint related properties
    $(hide) echo "oem_fingerprint_properties=$(OEM_THUMBPRINT_PROPERTIES)" >> $(zip_root)/META/misc_info.txt
endif
ifeq ($(TARGET_USERIMAGES_USE_UBIFS),true)
    $(call generate-ubifs-prop-dictionary, $(zip_root)/META/misc_info.txt)
endif
    $(call generate-userimage-prop-dictionary, $(zip_root)/META/misc_info.txt)
ifeq ($(TRUSTONIC_TEE_SUPPORT),yes)
    $(hide) ./build/tools/releasetools/make_recovery_patch $(zip_root) $(zip_root) $(PRODUCT_OUT)
else
    $(hide) ./build/tools/releasetools/make_recovery_patch $(zip_root) $(zip_root) $(TRUSTONIC_TEE_SUPPORT)
endif
ifeq ($(strip $(MTK_SECURITY_SW_SUPPORT)), yes)
    #security boot signature
    $(hide) $(SHELL) $(SECURITY_SIG_TOOL)
    $(hide) cp $(PRODUCT_OUT)/sig/boot.sig $(zip_root)/META/
    $(hide) cp $(PRODUCT_OUT)/sig/recovery.sig $(zip_root)/META/
    $(hide) cp $(PRODUCT_OUT)/sig/recovery.sig $(zip_root)/SYSTEM/etc/
Endif

持续做一些 copy 文件的动作。

@# Zip everything up, preserving symlinks
    $(hide) (cd $(zip_root) && zip -qry ../$(notdir $@) .)
    @# Run fs_config on all the system, vendor, boot ramdisk,
    @# and recovery ramdisk files in the zip, and save the output

把 zip_root 中的内容压缩成指标压缩包 zip –qry …/p92-target_files-eng.zip。

$(hide) zipinfo -1 $@ | awk 'BEGIN {FS="SYSTEM/"} /^SYSTEM\// {print"system/"$$2}' | $(HOST_OUT_EXECUTABLES)/fs_config -C -S $(SELINUX_FC) > $(zip_root)/META/filesystem_config.txt
    $(hide) zipinfo -1 $@ | awk 'BEGIN {FS="VENDOR/"} /^VENDOR\// {print"vendor/"$$2}' | $(HOST_OUT_EXECUTABLES)/fs_config -C -S $(SELINUX_FC) > $(zip_root)/META/vendor_filesystem_config.txt
    $(hide) zipinfo -1 $@ | awk 'BEGIN {FS="APD/"} /^APD\// {print"apd/"$$2}' | $(HOST_OUT_EXECUTABLES)/fs_config -C -S $(SELINUX_FC) > $(zip_root)/META/apd_filesystem_config.txt
    $(hide) zipinfo -1 $@ | awk 'BEGIN {FS="BOOT/RAMDISK/"} /^BOOT\/RAMDISK\// {print $$2}' | $(HOST_OUT_EXECUTABLES)/fs_config -C -S $(SELINUX_FC) > $(zip_root)/META/boot_filesystem_config.txt
    $(hide) zipinfo -1 $@ | awk 'BEGIN {FS="RECOVERY/RAMDISK/"} /^RECOVERY\/RAMDISK\// {print $$2}' | $(HOST_OUT_EXECUTABLES)/fs_config -C -S $(SELINUX_FC) > $(zip_root)/META/recovery_filesystem_config.txt
#wschen 2012-11-07
    $(if $(BOARD_CUSTOMIMAGE_PARTITION_SIZE), \
    $(hide) zipinfo -1 $@ | awk 'BEGIN {FS="CUSTOM/"} /^CUSTOM\// {print"custom/"$$2}' | $(HOST_OUT_EXECUTABLES)/fs_config -C -S $(SELINUX_FC) > $(zip_root)/META/custom_filesystem_config.txt)

为须要 ota 降级的分区目录及其目录下的文件增加 selinux 权限，并把这些权限内容输入到X_filesystem_config.txt 文件中，如meta/apd_filesystem_config.txt:

apd 0 0 755selabel=u:object_r:apd_file:s0 capabilities=0x0
apd/test.ini 0 2000 777selabel=u:object_r:apd_file:s0 capabilities=0x0
apd/apd.txt 0 2000 777selabel=u:object_r:apd_file:s0 capabilities=0x0
apd/apd.ini 0 2000 777selabel=u:object_r:apd_file:s0 capabilities=0x0
$(hide) (cd $(zip_root) && zip -q ../$(notdir $@) META/*filesystem_config.txt)

把这些 *filesystem_config.txt 文件一并搁置指标压缩包中

$(hide) ./build/tools/releasetools/add_img_to_target_files -p $(HOST_OUT) $@

这个文件 add_img_to_target_files.py 很重要, 次要性能是生成一个 images 文件夹，寄存着生成的各种 img（包含须要增加至 ota 降级的分区），如下图。如果须要把一个新分区增加至 ota 升级包中，这个文件则须要批改，可参考 custom/vendor 分区的增加办法。

$(hide) ./build/tools/releasetools/replace_img_from_target_files.py $@ $(PRODUCT_OUT)

要理解这句话的次要目标，来看一下 replace_img_from_target_files.py 文件的注解：

'''
Given a target-files zipfilethat does contain images (ie, does

have an IMAGES/ top-level subdirectory), replace the images to

the output dir.

Usage: replace_img_from_target_files target_files output
'''

把指标压缩包 out/target/product/(project)/obj/PACKAGING/target−filesintermeidates/p92−targetfiles−eng.zip 中的 images/ 门路下的各个 img 输入到 out/target/product/(project)/obj/PACKAGING/target-files_intermeidates/p92-target_files-eng.zip 中的 images/ 门路下的各个 img 输入到 out/target/product/(project)/obj/PACKAGING/target−filesintermeidates/p92−targetfiles−eng.zip 中的 images/ 门路下的各个 img 输入到 out/target/product/(project-name)/ 目录下。比方替换 out… 目录下原来的 boot.img，system.img，apd.img 等。

而后来看一下另外一个依赖：

DISTTOOLS :=  $(HOST_OUT_EXECUTABLES)/minigzip \
      $(HOST_OUT_EXECUTABLES)/mkbootfs \
      $(HOST_OUT_EXECUTABLES)/mkbootimg \
      $(HOST_OUT_EXECUTABLES)/fs_config \
      $(HOST_OUT_EXECUTABLES)/mkyaffs2image \
      $(HOST_OUT_EXECUTABLES)/zipalign \
      $(HOST_OUT_EXECUTABLES)/bsdiff \
      $(HOST_OUT_EXECUTABLES)/imgdiff \
      $(HOST_OUT_JAVA_LIBRARIES)/dumpkey.jar \
      $(HOST_OUT_JAVA_LIBRARIES)/signapk.jar \
      $(HOST_OUT_EXECUTABLES)/mkuserimg.sh \
      $(HOST_OUT_EXECUTABLES)/make_ext4fs \
      $(HOST_OUT_EXECUTABLES)/simg2img \
      $(HOST_OUT_EXECUTABLES)/e2fsck \
      $(HOST_OUT_EXECUTABLES)/build_verity_tree \
      $(HOST_OUT_EXECUTABLES)/verity_signer \
      $(HOST_OUT_EXECUTABLES)/append2simg

其实就是定义 disttools 为 out/host/ 目录下的一些可执行文件。

最初再跳到终极目标的 cmd 开始执行：

$(hide) MTK_SECURITY_SW_SUPPORT=$(MTK_SECURITY_SW_SUPPORT) MKBOOTIMG=$(MKBOOTIMG) \
    ./build/tools/releasetools/ota_from_target_files -v \
         --block \
         -p $(HOST_OUT) \
         -k $(KEY_CERT_PAIR) \
         $(if $(OEM_OTA_CONFIG), -o $(OEM_OTA_CONFIG)) \
         $(BUILT_TARGET_FILES_PACKAGE) $@

所以跳到 ota_from_target_files python 文件中，接下来就要看 ota_from_target_files 这个文件的作用了。

正文完
android
发表至： android
2022-05-27
 0
关于android:Android-Studio上传项目到GitHub仓库
关于android:北京小程序开发微信小程序开发时间总结
关于android:一起看-IO-Google-TV-和-Android-TV-OS-的最新进展
关于android:聚焦-Android-11-Jetpack