共计 6599 个字符，预计需要花费 17 分钟才能阅读完成。
在《高可用 | Xenon：后 MHA 时代的抉择》一文中，咱们对 Xenon 的实现原理、利用场景等做了简要介绍。文章公布后，社区小伙伴都在征询 Xenon 如何与 MySQL 配合应用？
本文来自知数堂投稿，是一篇基于 Xenon 架构原理，部署 一主两从 架构的 MySQL 高可用集群的实操文档。
<center>Xenon 架构图 </center>
环境信息：
- Redhat 7
- MySQL 5.7
- Xenon 1.0.7
- XtraBackup 24
* 另：Xenon 反对 MySQL 5.6/5.7/8.0 内核，本文以 5.7 为例 。
1. 搭建 MySQL 加强半同步复制架构
1.1 筹备单机 MySQL
筹备三台单机 MySQL，装置步骤（略）。
- db1 (10.10.10.10)
- db2 (10.10.10.11)
- db3 (10.10.10.18)
1.2 配置主从复制
配置三台单机 MySQL 主从 复制关系，配置步骤（略）。
1.3 配置加强半同步复制
在 db1 服务器上，开启 semi_sync 插件。
set global super_read_only=0; --- 默认
set global read_only=0; --- 默认
INSTALL PLUGIN rpl_semi_sync_slave SONAME 'semisync_slave.so';
INSTALL PLUGIN rpl_semi_sync_master SONAME 'semisync_master.so';
show plugins;在 db2 和 db3 服务器上执行并查看后果。
stop slave io_thread;
start slave io_thread;
2020-01-05T12:16:01.269943Z 20 [Note] Aborted connection 20 to db: 'unconnected' user: 'root' host: 'localhost' (Got timeout reading communication packets)
2020-01-05T12:25:57.193720Z 13 [Note] Slave I/O thread killed while reading event for channel ''2020-01-05T12:25:57.193804Z 13 [Note] Slave I/O thread exiting for channel'', read up to log 'mysql-bin.000002', position 2310
2020-01-05T12:25:57.227685Z 22 [Note] Slave I/O thread: Start semi-sync replication to master 'repl@10.10.10.10:3306' in log 'mysql-bin.000002' at position 2310
2020-01-05T12:25:57.227782Z 22 [Warning] Storing MySQL user name or password information in the master info repository is not secure and is therefore not recommended. Please consider using the USER and PASSWORD connection options for START SLAVE; see the 'START SLAVE Syntax' in the MySQL Manual for more information.
2020-01-05T12:25:57.230523Z 22 [Note] Slave I/O thread for channel '': connected to master'repl@10.10.10.10:3306',replication started in log'mysql-bin.000002' at position 2310至此， 一主两从 加强半同步复制就配置好了，接下来即可应用 Xenon 搭建高可用架构。
2. 应用 Xenon 搭建高可用架构
2.1 环境筹备
2.1.1 配置帐号
批改 MySQL 的门路和帐号密码，由 /sbin/nologin 批改为 /bin/bash，并批改 MySQL 帐号的明码。
阐明：MySQL 默认门路为 /bin/bash。
chsh mysql
Changing shell for mysql.
New shell [/sbin/nologin]: /bin/bash
passwd mysql 为 Xenon 的帐号增加 sudo /usr/ip 权限。
visudo
mysql ALL=(ALL) NOPASSWD: /usr/sbin/ip
# 增加权限前
[mysql@db1 ~]$ sudo /sbin/ip a a 10.10.10.30/16 dev enp0s3 && arping -c 3 -A 172.18.0.100 -I enp0s3
bind: Cannot assign requested address
# 增加权限后
[mysql@db1 ~]$ ping 10.10.10.30
PING 10.10.10.30 (10.10.10.30) 56(84) bytes of data.
64 bytes from 10.10.10.30: icmp_seq=1 ttl=64 time=0.021 ms
[1]+ Stopped ping 10.10.10.302.1.2 建设互信关系
建设三台服务器之间互信关系。
ssh-copy-id -i /home/mysql/.ssh/id_rsa.pub 10.10.10.18
ssh-copy-id -i /home/mysql/.ssh/id_rsa.pub 10.10.10.10
ssh-copy-id -i /home/mysql/.ssh/id_rsa.pub 10.10.10.112.1.3 装置 XtraBackup
yum install -y perl-DBD-MySQL
rpm -ivh libev-4.15-1.el6.rf.x86_64.rpm
rpm -ivh percona-xtrabackup-24-2.4.15-1.el7.x86_64.rpm
root@db2 tmp]# rpm -ivh percona-xtrabackup-24-2.4.15-1.el7.x86_64.rpm
warning: percona-xtrabackup-24-2.4.15-1.el7.x86_64.rpm: Header V4 RSA/SHA256 Signature, key ID 8507efa5: NOKEY
Preparing... ################################# [100%]
Updating / installing...
1:percona-xtrabackup-24-2.4.15-1.el################################# [100%]2.1.4 装置 Go
wget https://golang.org/doc/install?download=go1.13.4.linux-amd64.tar.gz
tar -C /usr/local -xzf go1.13.4.linux-amd64.tar.gz
echo "export PATH=\$PATH:/usr/local/go/bin" >> /etc/profile
[root@db1 tmp]# source /etc/profile
[root@db1 tmp]# which go
/usr/local/go/bin/go
[root@db1 tmp]# go version
go version go1.13.4 linux/amd642.2 装置 Xenon
在 https://github.com/radondb/xe… 下载 1.0.7 版本的安装包至服务器。
[root@db1 local]# tar -xvf xenon-1.0.7.tar.gz
[root@db1 local]# mv xenon-1.0.7 xenon
[root@db1 local]# cd /usr/local/xenon
[root@db1 xenon]# make build
fatal: Not a git repository (or any of the parent directories): .git
fatal: Not a git repository (or any of the parent directories): .git
fatal: Not a git repository (or any of the parent directories): .git
fatal: Not a git repository (or any of the parent directories): .git
--> Building...
# 省略……
[root@db1 xenon]# make2.3 配置 Xenon
2.3.1 增加配置文件
增加 db1 的配置文件。
[mysql@db1 conf]$ cat xenon.json
{
"server":
{"endpoint":"10.10.10.10:8801"},
"raft":
{
"meta-datadir":"raft.meta",
"heartbeat-timeout":1000,
"election-timeout":3000,
"admit-defeat-hearbeat-count": 5,
"purge-binlog-disabled": true,
"leader-start-command":"sudo /sbin/ip a a 10.10.10.20/24 dev enp0s3 && arping -c 3 -A 10.10.10.20 -I enp0s3",
"leader-stop-command":"sudo /sbin/ip a d 10.10.10.20/24 dev enp0s3"
},
"mysql":
{
"admin":"root",
"passwd":"123456",
"host":"127.0.0.1",
"port":3306,
"basedir":"/usr/local/mysql",
"defaults-file":"/etc/my.cnf"
},
"replication":
{
"user":"repl",
"passwd":"123456"
},
"backup":
{
"ssh-host":"10.10.10.10",
"ssh-user":"mysql",
"ssh-passwd":"123456",
"basedir":"/usr/local/mysql",
"backup-dir":"/backup",
"mysqld-monitor-interval": 5000,
"backup-use-memory": "3072M",
"ssh-port": 22,
"backup-parallel": 2,
"backup-iops-limits": 100000,
"xtrabackup-bindir":"/usr/bin"
},
"rpc":
{"request-timeout":500},
"log":
{"level":"INFO"}
}增加 db2 和 db3 的配置文件。以 db2 配置文件为示例。
[mysql@db2 ~]$ cd /usr/local/xenon/conf
[mysql@db2 conf]$ cat xenon.json
{
"server":
{"endpoint":"10.10.10.11:8801" #增加 db3 配置文件时，需设置为 10.10.10.18},
"raft":
{
"meta-datadir":"raft.meta",
"heartbeat-timeout":1000,
"election-timeout":3000,
"admit-defeat-hearbeat-count": 5,
"purge-binlog-disabled": true,
"leader-start-command":"sudo /sbin/ip a a 10.10.10.20/24 dev enp0s3 && arping -c 3 -A 10.10.10.20 -I enp0s3",
"leader-stop-command":"sudo /sbin/ip a d 10.10.10.20/24 dev enp0s3"
},
"mysql":
{
"admin":"root",
"passwd":"123456",
"host":"127.0.0.1",
"port":3306,
"basedir":"/usr/local/mysql",
"defaults-file":"/etc/my.cnf"
},
"replication":
{
"user":"repl",
"passwd":"123456"
},
"backup":
{
"ssh-host":"10.10.10.11",
"ssh-user":"mysql",
"ssh-passwd":"123456",
"basedir":"/usr/local/mysql",
"backup-dir":"/backup",
"mysqld-monitor-interval": 5000,
"backup-use-memory": "3072M",
"ssh-port": 22,
"backup-parallel": 2,
"backup-iops-limits": 100000,
"xtrabackup-bindir":"/usr/bin"
},
"rpc":
{"request-timeout":500},
"log":
{"level":"INFO"}
} 留神：主机配置文件中 leader-start-command 和 leader-stop-command 参数的值，10.10.10.20/24 和 enp0s3 须要依据理论状况填写。
2.3.2 配置备份环境
mkdir /backup & chown -R mysql.mysql /backup在复制环境中创立管理员帐号。
create user 'root'@'127.0.0.1' identified by '123456';
grant all privileges on *.* to 'root'@'127.0.0.1';
flush privileges;2.3.3 批改权限
mkdir /etc/xenon/
ln -s /usr/local/xenon/conf/xenon.json /etc/xenon/
chown mysql.mysql -R /usr/local/xenon
chown mysql.mysql -R /etc/xenon/2.3.4 批改日志目录
mkdir /etc/xenon/log
chown mysql.mysql /etc/xenon/log
cd /usr/local/xenon/bin/
echo "/etc/xenon/xenon.json" > /usr/local/xenon/bin/config.path2.4 启用 Xenon
2.4.1 登录
通过 MySQL 帐号登录并启动 Xenon。
# db1
su - mysql
/usr/local/xenon/bin/xenon -c /etc/xenon/xenon.json > /etc/xenon/log/xenon.log 2>&1 &
# db2
su - mysql
/usr/local/xenon/bin/xenon -c /etc/xenon/xenon.json > /etc/xenon/log/xenon.log 2>&1 &
# db3
su - mysql
/usr/local/xenon/bin/xenon -c /etc/xenon/xenon.json > /etc/xenon/log/xenon.log 2>&1 &2.4.2 增加成员
/usr/local/xenon/bin/xenoncli cluster add \
10.10.10.10:8801,10.10.10.11:8801,10.10.10.18:88012.4.3 查看集群状态
查看集群状态。
查看 MySQL 状态。
MySQL 高可用部署胜利！
总结
在应用 Xenon 搭建高可用集群时，须要留神以下几点：
- MySQL 5.7+ GTID 复制构造为根底
- 必须有加强半同步复制插件
- MySQL 帐号必须是
/bin/bash - Xenon 和 MySQL 必须运行在同一帐号下，个别就是 MySQL
- MySQL 帐号在节点之前必须有 SSH 信赖
- 节点必须装置 Xtrabackup
- 必须应用 mysqld_safe 启用 mysql
下期预报
下一期咱们将介绍 Xenon 常见操作。
正文完
