共计 7465 个字符，预计需要花费 19 分钟才能阅读完成。
COMP5930M – Scientific Computing
Coursework 2
November 16, 2021
Deadline
10:00, Monday 13th December
Task
The numbered sections of this document describe problems which are modelled by partial differ-
ential equations. A numerical model is specified which leads to a nonlinear system of equations.
You will use one or more of the algorithms we have covered in the module to produce a numerical
solution.
Matlab scripts referred to in this document can be downloaded from Minerva under Learning
Resources / Coursework. Matlab implementations of some algorithms have been provided as
part of the module but you can implement your solutions in any other language if you prefer.
You should submit your answers as a single PDF document via Minerva before the stated
deadline. MATLAB code submitted as part of your answers should be included in the document.
MATLAB functions should include appropriate help information that describe the purpose and
use of that function.
Standard late penalties apply for work submitted after the deadline.
Disclaimer
This is intended as an individual piece of work and, while discussion of the work is
encouraged, plagiarism of writing or code in any form is strictly prohibited.
- A one-dimensional PDE: Nonlinear parabolic equation
[20 marks total]
Consider the nonlinear parabolic PDE: find u(x, t) such that
in the spatial interval x ∈ (0, 1) and time domain t > 0.
Here and α are known, positive, constants.
Boundary conditions are specified as u(0) = 0 and u(1) = 1.
Initial conditions are specified at t = 0 as u(x, 0) = x.
We numerically approximate (1) using the method of lines on a uniform spatial grid with
m nodes on the interval [0, 1] with grid spacing h, and a fixed time step of ?t.
Code for this problem can be downloaded from Minerva and is in the Q1/ folder.
(a) Find the fully discrete formulation for (1) using the central finite difference formulas
h2
in space and the implicit Euler method in time.
Define the nonlinear system F(U) = 0 that needs to be solved at each time step to
obtain a numerical solution of the PDE (1).
(b) Solve the problem for different problem sizes: N = 81, 161, 321, 641 (choose m ap-
propriately for each case). Use NT = 40 time steps. Create a table that shows the
total computational time taken T , the total number of Newton iterations S, and the
average number of Newton iterations per time step TS = T/S. Time the execution
of your code using Matlab functions tic and toc. Show for each different N :
i. the total number of unknowns, N
ii. the total computational time taken, T
iii. the total number of Newton iterations, S
iv. the average time spent per Newton iteration, tS = T/S
Estimate the algorithmic cost of one Newton iteration as a function of the number of
equations N from this simulation data. Does your observation match the theoretical
cost of the algorithms you have used?
Hint: Take the values N and the measured tS(N) and fit a curve of the form
tS = CN
P by taking logarithms in both sides of the equation to arrive at
log tS = logC + P logN,
then use polyfit(log(N), log(tS), 1 ) to find the P that best fits your data.
(c) Derive the exact expression for row i of the Jacobian for this problem.
How many nonzero elements are on each row of the Jacobian matrix?
(d) Repeat the timing experiment (c), but using now the Thomas algorithm sparseThomas.m
to solve the linear system and the tridiagonal implementation of the numerical Ja-
cobian computation tridiagonalJacobian.m. You will need to modify the code to
call newtonAlgorithm.m appropriately.
Create a table that shows for each different N :
i. the total number of unknowns, N
ii. the total computational time taken, T
iii. the total number of Newton iterations, S
iv. the average time spent per Newton iteration, tS = T/S
Estimate the algorithmic cost of one Newton iteration as a function of the number of
equations N from this set of simulations. Does your observation match the theoretical
cost of the algorithms you have used?
Hint: Take the values N and the measured tS(N) and fit a curve of the form
tS = CN
P by taking logarithms in both sides of the equation to arrive at
log tS = logC + P logN,
then use polyfit(log(N), log(tS), 1 ) to find the P that best fits your data.
- A three-dimensional PDE: Nonlinear diffusion
[20 marks total]
Consider the following PDE for u(x, y, z):
defined on [x, y, z] ∈ [?10, 10]3 with u(x, y, z) = 0 on the boundary of the domain, and
some known function g(x, y, z) that does not depend on u.
Using a finite difference approximation to the PDE (2) on a uniform grid, with grid size h
and n nodes in each coordinate direction, the nonlinear equation Fijk = 0 to be solved at
an internal node may be written as
Code for this problem can be downloaded from Minerva and is in the Q2/ folder. The
Matlab function runFDM.m controls the numerical simulation of the discrete nonlinear
system (3).
(a) Run the model using runFDM.m with grid dimension m = 5, 8 and 11 for tol = 10?8
and initial guess u(x, 0) = 0 for all x. Create a table that shows for each different N :
i. the total number of unknowns, N
ii. the total computational time taken, T
iii. the total number of Newton iterations, S
iv. the average time spent per Newton iteration, tS = T/S
Estimate the algorithmic cost of a single Newton iteration in terms of the size of
the nonlinear system N , i.e. T = O(Np). How does it compare to the theoretical
worst-case complexity?
Hint: Take the values N and the measured tS(N) and fit a curve of the form tS =
CNP by taking logarithms in both sides of the equation to arrive at
log tS = logC + P logN,
then use polyfit(log(N), log(tS), 1 ) to find the P that best fits your data.
(b) Replace in runFDM.m the call to a dense Jacobian implementation fnJacobian.m with
a call to a sparse implementation, buildJacobian.m. You will need to uncomment
the following function calls before calling the Newton algorithm:
[A, nz] = sparsePattern3DFD(m); % 3d FDM sparsity pattern
[loc, nf] = sparseJac(A,N); % function calls required to evaluate J
i. Visualise the sparsity pattern of A using the command spy in the case m = 8
and include the plot in your report. Note: The matrix A has the same sparsity
pattern as the Jacobian for this problem.
ii. Use the command lu to compute the LU-factorisation of A in the case m = 8.
What are the number of non-zero elements L and U , respectively?
iii. Visualise the sparsity pattern of the LU -factors using the command spy and
include the plot in your report. Can you observe something unexpected about
the matrix L? How can you explain this perceived discrepancy?
iv. Use these matrices as an example to explain what we mean by fill-in of the
LU -factors.
(c) Use the MATLAB code provided to assemble the Jacobian matrix J for problem (2)
with the grid size m = 8, and consider solving the linear problem Jx = b, where
b = [1, 1, 1, . . . , 1]T . Solve this linear problem using three different solution methods:
i. LU-decomposition direct method (directLU.m);
ii. Jacobi iterative method (jacobi.m) using the initial guess x0 = b and tol = 10
6;
iii. Gauss-Seidel iterative method (gaussseidel.m) using the initial guess x0 = b
and tol = 10?6.
Solve the problem 100 times with each method and report the total time used for
each method (hint: use the commands tic and toc), plus for the iterative methods
the number of iterations taken.
(d) Replace in runFDM.m the call to linearSolve.m function that uses dense linear alge-
bra with the alternative matlabLinearSolve.m that uses sparse linear algebra. Solve
the problem using the sparse implementation for m = 15, 19 and 23. Create a table
that shows for each different N :
i. the total number of unknowns, N
ii. the total computational time taken, T
iii. the total number of Newton iterations, S
iv. the average time spent per Newton iteration, tS = T/S
Estimate the algorithmic cost of this new sparsity-based implementation using the
timings of the numerical experiments. Compare the results with those of 2(a).
Hint: Take the values N and the measured tS(N) and fit a curve of the form tS =
CNP by taking logarithms in both sides of the equation to arrive at
log tS = logC + P logN,
then use polyfit(log(N), log(tS), 1 ) to find the P that best fits your data.
Learning objectives
Formulation of sparse nonlinear systems of equations from discretised PDE models.
Measuring efficiency of algorithms for large nonlinear systems.
Efficient implementation for sparse nonlinear systems.
Mark scheme
This piece of work is worth 20% of the final module grade.
There are 40 marks in total.
- 1d PDE [20 marks total]
(a) Formulation of the discrete problem [5 marks]
(b) Timings and analysis of complexity, general case [5 marks]
(c) Jacobian structure [5 marks]
(d) Timings and analysis of complexity, tridiagonal case [5 marks] - 3d PDE [20 marks total]
(a) Simulations with dense version of the solver [5 marks]
(b) Analysis of the sparsity of the Jacobian matrix and the the LU factors [5 marks]
(c) Comparison of linear solvers [5 marks]
(d) Simulations with sparse version of the solver [5 marks]
