Java NIO

3次阅读

共计 9925 个字符,预计需要花费 25 分钟才能阅读完成。

1.Java NIO 简介
2.Java NIO 与 IO 的主要区别
3. 缓冲区 (Buffer) 和通道(Channel)
4. 文件通道(FileChannel)
5.NIO 的非阻塞式网络通信
选择器(Selector)SocketChannel、ServerSocketChannel、DatagramChannel
面向流

面向缓冲区

Java NIO(New IO)是从 Java 1.4 版本开始引入的一个新的 IO API,可以替代标准的 Java IO API。NIO 与原来的 IO 有同样的作用和目的,但是使用的方式完全不同,NIO 支持面向缓冲区的、基于通道的 IO 操作。NIO 将以更加高效的方式进行文件的读写操作。
Java NIO 与 IO 的主要区别

import java.nio.ByteBuffer;
import org.junit.Test;
/*

一、缓冲区(Buffer):在 Java NIO 中负责数据的存取。缓冲区就是数组。用于存储不同数据类型的数据

根据数据类型不同(boolean 除外),提供了相应类型的缓冲区:
ByteBuffer
CharBuffer
ShortBuffer
IntBuffer
LongBuffer
FloatBuffer
DoubleBuffer

上述缓冲区的管理方式几乎一致,通过 allocate() 获取缓冲区

二、缓冲区存取数据的两个核心方法:
put() : 存入数据到缓冲区中
get() : 获取缓冲区中的数据

三、缓冲区中的四个核心属性:
capacity : 容量,表示缓冲区中最大存储数据的容量。一旦声明不能改变。
limit : 界限,表示缓冲区中可以操作数据的大小。(limit 后数据不能进行读写)
position : 位置,表示缓冲区中正在操作数据的位置。

mark : 标记,表示记录当前 position 的位置。可以通过 reset() 恢复到 mark 的位置

0 <= mark <= position <= limit <= capacity

四、直接缓冲区与非直接缓冲区:
非直接缓冲区:通过 allocate() 方法分配缓冲区,将缓冲区建立在 JVM 的内存中
直接缓冲区:通过 allocateDirect() 方法分配直接缓冲区,将缓冲区建立在物理内存中。可以提高效率

*/public class TestBuffer {
@Test
public void test3(){
// 分配直接缓冲区
ByteBuffer buf = ByteBuffer.allocateDirect(1024);

System.out.println(buf.isDirect());
}

@Test
public void test2(){
String str = “abcde”;

ByteBuffer buf = ByteBuffer.allocate(1024);

buf.put(str.getBytes());

buf.flip();

byte[] dst = new byte[buf.limit()];
buf.get(dst, 0, 2);
System.out.println(new String(dst, 0, 2));
System.out.println(buf.position());

//mark() : 标记
buf.mark();

buf.get(dst, 2, 2);
System.out.println(new String(dst, 2, 2));
System.out.println(buf.position());

//reset() : 恢复到 mark 的位置
buf.reset();
System.out.println(buf.position());

// 判断缓冲区中是否还有剩余数据
if(buf.hasRemaining()){

// 获取缓冲区中可以操作的数量
System.out.println(buf.remaining());
}
}

@Test
public void test1(){
String str = “abcde”;

//1. 分配一个指定大小的缓冲区
ByteBuffer buf = ByteBuffer.allocate(1024);

System.out.println(“—————–allocate()—————-“);
System.out.println(buf.position());
System.out.println(buf.limit());
System.out.println(buf.capacity());

//2. 利用 put() 存入数据到缓冲区中
buf.put(str.getBytes());

System.out.println(“—————–put()—————-“);
System.out.println(buf.position());
System.out.println(buf.limit());
System.out.println(buf.capacity());

//3. 切换读取数据模式
buf.flip();

System.out.println(“—————–flip()—————-“);
System.out.println(buf.position());
System.out.println(buf.limit());
System.out.println(buf.capacity());

//4. 利用 get() 读取缓冲区中的数据
byte[] dst = new byte[buf.limit()];
buf.get(dst);
System.out.println(new String(dst, 0, dst.length));

System.out.println(“—————–get()—————-“);
System.out.println(buf.position());
System.out.println(buf.limit());
System.out.println(buf.capacity());

//5. rewind() : 可重复读
buf.rewind();

System.out.println(“—————–rewind()—————-“);
System.out.println(buf.position());
System.out.println(buf.limit());
System.out.println(buf.capacity());

//6. clear() : 清空缓冲区. 但是缓冲区中的数据依然存在,但是处于“被遗忘”状态
buf.clear();

System.out.println(“—————–clear()—————-“);
System.out.println(buf.position());
System.out.println(buf.limit());
System.out.println(buf.capacity());

System.out.println((char)buf.get());

}

}
1- 通道(Channel)与缓冲区(Buffer)
通道和缓冲区Java NIO 系统的核心在于:通道 (Channel) 和缓冲区 (Buffer)。通道表示打开到 IO 设备(例如:文件、套接字) 的连接。若需要使用 NIO 系统,需要获取用于连接 IO 设备的通道以及用于容纳数据的缓冲区。然后操作缓冲区,对数据进行处理。
缓冲区(Buffer)
 缓冲区(Buffer):一个用于特定基本数据类型的容器。由 java.nio 包定义的,所有缓冲区都是 Buffer 抽象类的子类。
 Java NIO 中的 Buffer 主要用于与 NIO 通道进行交互,数据是从通道读入缓冲区,从缓冲区写入通道中的。
缓冲区(Buffer)Buffer 就像一个数组,可以保存多个相同类型的数据。根据数据类型不同(boolean 除外),有以下 Buffer 常用子类: ByteBuffer CharBuffer ShortBuffer IntBuffer LongBuffer FloatBuffer DoubleBuffer 上述 Buffer 类他们都采用相似的方法进行管理数据,只是各自管理的数据类型不同而已。都是通过如下方法获取一个 Buffer 对象:
缓冲区的基本属性
Buffer 中的重要概念: 容量(capacity):表示 Buffer 最大数据容量,缓冲区容量不能为负,并且创建后不能更改。
 限制(limit):第一个不应该读取或写入的数据的索引,即位于 limit 后的数据不可读写。缓冲区的限制不能为负,并且不能大于其容量。
 位置(position):下一个要读取或写入的数据的索引。缓冲区的位置不能为负,并且不能大于其限制
 标记 (mark) 与重置(reset):标记是一个索引,通过 Buffer 中的 mark() 方法指定 Buffer 中一个特定的 position,之后可以通过调用 reset() 方法恢复到这个 position.
缓冲区的基本属性
Buffer 的常用方法

缓冲区的数据操作
Buffer 所有子类提供了两个用于数据操作的方法:get()与 put() 方法
获取 Buffer 中的数据
get():读取单个字节 get(byte[] dst):批量读取多个字节到 dst 中 get(int index):读取指定索引位置的字节(不会移动 position)
放入数据到 Buffer 中
put(byte b):将给定单个字节写入缓冲区的当前位置 put(byte[] src):将 src 中的字节写入缓冲区的当前位置 put(int index, byte b):将指定字节写入缓冲区的索引位置(不会移动 position)
直接与非直接缓冲区

字节缓冲区要么是直接的,要么是非直接的。如果为直接字节缓冲区,则 Java 虚拟机会尽最大努力直接在此缓冲区上执行本机 I /O 操作。也就是说,在每次调用基础操作系统的一个本机 I /O 操作之前(或之后),虚拟机都会尽量避免将缓冲区的内容复制到中间缓冲区中(或从中间缓冲区中复制内容)。
直接字节缓冲区可以通过调用此类的 allocateDirect() 工厂方法来创建。此方法返回的缓冲区进行分配和取消分配所需成本通常高于非直接缓冲区。直接缓冲区的内容可以驻留在常规的垃圾回收堆之外,因此,它们对应用程序的内存需求量造成的影响可能并不明显。所以,建议将直接缓冲区主要分配给那些易受基础系统的本机 I /O 操作影响的大型、持久的缓冲区。一般情况下,最好仅在直接缓冲区能在程序性能方面带来明显好处时分配它们。
直接字节缓冲区还可以通过 FileChannel 的 map() 方法将文件区域直接映射到内存中来创建。该方法返回 MappedByteBuffer。Java 平台的实现有助于通过 JNI 从本机代码创建直接字节缓冲区。如果以上这些缓冲区中的某个缓冲区实例指的是不可访问的内存区域,则试图访问该区域不会更改该缓冲区的内容,并且将会在访问期间或稍后的某个时间导致抛出不确定的异常。
字节缓冲区是直接缓冲区还是非直接缓冲区可通过调用其 isDirect() 方法来确定。提供此方法是为了能够在性能关键型代码中执行显式缓冲区管理。
非直接缓冲区

直接缓冲区

通道(Channel)
通道(Channel):由 java.nio.channels 包定义的。Channel 表示 IO 源与目标打开的连接。Channel 类似于传统的“流”。只不过 Channel 本身不能直接访问数据,Channel 只能与 Buffer 进行交互。
通道(Channel)

通道(Channel)
Java 为 Channel 接口提供的最主要实现类如下:
•FileChannel:用于读取、写入、映射和操作文件的通道。•DatagramChannel:通过 UDP 读写网络中的数据通道。•SocketChannel:通过 TCP 读写网络中的数据。•ServerSocketChannel:可以监听新进来的 TCP 连接,对每一个新进来的连接都会创建一个 SocketChannel。
获取通道
获取通道的一种方式是对支持通道的对象调用 getChannel() 方法。支持通道的类如下: FileInputStream FileOutputStream RandomAccessFile DatagramSocket Socket ServerSocket 获取通道的其他方式是使用 Files 类的静态方法 newByteChannel() 获取字节通道。或者通过通道的静态方法 open() 打开并返回指定通道。
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.RandomAccessFile;
import java.nio.ByteBuffer;
import java.nio.CharBuffer;
import java.nio.MappedByteBuffer;
import java.nio.channels.FileChannel;
import java.nio.channels.FileChannel.MapMode;
import java.nio.charset.CharacterCodingException;
import java.nio.charset.Charset;
import java.nio.charset.CharsetDecoder;
import java.nio.charset.CharsetEncoder;
import java.nio.file.Paths;
import java.nio.file.StandardOpenOption;
import java.util.Map;
import java.util.Map.Entry;
import java.util.Set;

import org.junit.Test;

/*
* 一、通道(Channel):用于源节点与目标节点的连接。在 Java NIO 中负责缓冲区中数据的传输。Channel 本身不存储数据,因此需要配合缓冲区进行传输。
*
* 二、通道的主要实现类
* java.nio.channels.Channel 接口:
* |–FileChannel
* |–SocketChannel
* |–ServerSocketChannel
* |–DatagramChannel
*
* 三、获取通道
* 1. Java 针对支持通道的类提供了 getChannel() 方法
* 本地 IO:
* FileInputStream/FileOutputStream
* RandomAccessFile
*
* 网络 IO:
* Socket
* ServerSocket
* DatagramSocket
*
* 2. 在 JDK 1.7 中的 NIO.2 针对各个通道提供了静态方法 open()
* 3. 在 JDK 1.7 中的 NIO.2 的 Files 工具类的 newByteChannel()
*
* 四、通道之间的数据传输
* transferFrom()
* transferTo()
*
* 五、分散 (Scatter) 与聚集(Gather)
* 分散读取(Scattering Reads):将通道中的数据分散到多个缓冲区中
* 聚集写入(Gathering Writes):将多个缓冲区中的数据聚集到通道中
*
* 六、字符集:Charset
* 编码:字符串 -> 字节数组
* 解码:字节数组 -> 字符串
*
*/
public class TestChannel {

// 字符集
@Test
public void test6() throws IOException{
Charset cs1 = Charset.forName(“GBK”);

// 获取编码器
CharsetEncoder ce = cs1.newEncoder();

// 获取解码器
CharsetDecoder cd = cs1.newDecoder();

CharBuffer cBuf = CharBuffer.allocate(1024);
cBuf.put(“ 威武!”);
cBuf.flip();

// 编码
ByteBuffer bBuf = ce.encode(cBuf);

for (int i = 0; i < 12; i++) {
System.out.println(bBuf.get());
}

// 解码
bBuf.flip();
CharBuffer cBuf2 = cd.decode(bBuf);
System.out.println(cBuf2.toString());

System.out.println(“——————————————————“);

Charset cs2 = Charset.forName(“GBK”);
bBuf.flip();
CharBuffer cBuf3 = cs2.decode(bBuf);
System.out.println(cBuf3.toString());
}

@Test
public void test5(){
Map<String, Charset> map = Charset.availableCharsets();

Set<Entry<String, Charset>> set = map.entrySet();

for (Entry<String, Charset> entry : set) {
System.out.println(entry.getKey() + “=” + entry.getValue());
}
}

// 分散和聚集
@Test
public void test4() throws IOException{
RandomAccessFile raf1 = new RandomAccessFile(“1.txt”, “rw”);

//1. 获取通道
FileChannel channel1 = raf1.getChannel();

//2. 分配指定大小的缓冲区
ByteBuffer buf1 = ByteBuffer.allocate(100);
ByteBuffer buf2 = ByteBuffer.allocate(1024);

//3. 分散读取
ByteBuffer[] bufs = {buf1, buf2};
channel1.read(bufs);

for (ByteBuffer byteBuffer : bufs) {
byteBuffer.flip();
}

System.out.println(new String(bufs[0].array(), 0, bufs[0].limit()));
System.out.println(“—————–“);
System.out.println(new String(bufs[1].array(), 0, bufs[1].limit()));

//4. 聚集写入
RandomAccessFile raf2 = new RandomAccessFile(“2.txt”, “rw”);
FileChannel channel2 = raf2.getChannel();

channel2.write(bufs);
}

// 通道之间的数据传输(直接缓冲区)
@Test
public void test3() throws IOException{
FileChannel inChannel = FileChannel.open(Paths.get(“d:/1.mkv”), StandardOpenOption.READ);
FileChannel outChannel = FileChannel.open(Paths.get(“d:/2.mkv”), StandardOpenOption.WRITE, StandardOpenOption.READ, StandardOpenOption.CREATE);

// inChannel.transferTo(0, inChannel.size(), outChannel);
outChannel.transferFrom(inChannel, 0, inChannel.size());

inChannel.close();
outChannel.close();
}

// 使用直接缓冲区完成文件的复制(内存映射文件)
@Test
public void test2() throws IOException{//2127-1902-1777
long start = System.currentTimeMillis();

FileChannel inChannel = FileChannel.open(Paths.get(“d:/1.mkv”), StandardOpenOption.READ);
FileChannel outChannel = FileChannel.open(Paths.get(“d:/2.mkv”), StandardOpenOption.WRITE, StandardOpenOption.READ, StandardOpenOption.CREATE);

// 内存映射文件
MappedByteBuffer inMappedBuf = inChannel.map(MapMode.READ_ONLY, 0, inChannel.size());
MappedByteBuffer outMappedBuf = outChannel.map(MapMode.READ_WRITE, 0, inChannel.size());

// 直接对缓冲区进行数据的读写操作
byte[] dst = new byte[inMappedBuf.limit()];
inMappedBuf.get(dst);
outMappedBuf.put(dst);

inChannel.close();
outChannel.close();

long end = System.currentTimeMillis();
System.out.println(“ 耗费时间为:” + (end – start));
}

// 利用通道完成文件的复制(非直接缓冲区)
@Test
public void test1(){//10874-10953
long start = System.currentTimeMillis();

FileInputStream fis = null;
FileOutputStream fos = null;
//①获取通道
FileChannel inChannel = null;
FileChannel outChannel = null;
try {
fis = new FileInputStream(“d:/1.mkv”);
fos = new FileOutputStream(“d:/2.mkv”);

inChannel = fis.getChannel();
outChannel = fos.getChannel();

//②分配指定大小的缓冲区
ByteBuffer buf = ByteBuffer.allocate(1024);

//③将通道中的数据存入缓冲区中
while(inChannel.read(buf) != -1){
buf.flip(); // 切换读取数据的模式
//④将缓冲区中的数据写入通道中
outChannel.write(buf);
buf.clear(); // 清空缓冲区
}
} catch (IOException e) {
e.printStackTrace();
} finally {
if(outChannel != null){
try {
outChannel.close();
} catch (IOException e) {
e.printStackTrace();
}
}

if(inChannel != null){
try {
inChannel.close();
} catch (IOException e) {
e.printStackTrace();
}
}

if(fos != null){
try {
fos.close();
} catch (IOException e) {
e.printStackTrace();
}
}

if(fis != null){
try {
fis.close();
} catch (IOException e) {
e.printStackTrace();
}
}
}

long end = System.currentTimeMillis();
System.out.println(“ 耗费时间为:” + (end – start));

}

}

正文完
 0