共计 19805 个字符，预计需要花费 50 分钟才能阅读完成。
效果图如下：
一、为预览控件设置圆角
为控件设置 ViewOutlineProvider
public RoundTextureView(Context context, AttributeSet attrs) {super(context, attrs);
setOutlineProvider(new ViewOutlineProvider() {
@Override
public void getOutline(View view, Outline outline) {Rect rect = new Rect(0, 0, view.getMeasuredWidth(), view.getMeasuredHeight());
outline.setRoundRect(rect, radius);
}
});
setClipToOutline(true);
}
在需要时修改圆角值并更新
public void setRadius(int radius) {this.radius = radius;}
public void turnRound() {invalidateOutline();
}
即可根据设置的圆角值更新控件显示的圆角大小。当控件为正方形，且圆角值为边长的一半，显示的就是圆形。
二、实现正方形预览
1. 设备支持 1:1 预览尺寸
首先介绍一种简单但是局限性较大的实现方式：将相机预览尺寸和预览控件的大小都调整为 1:1。
一般 Android 设备都支持多种预览尺寸，以 Samsung Tab S3 为例
在使用 Camera API 时，其支持的预览尺寸如下：
2019-08-02 13:16:08.669 16407-16407/com.wsy.glcamerademo I/CameraHelper: supportedPreviewSize: 1920x1080
2019-08-02 13:16:08.669 16407-16407/com.wsy.glcamerademo I/CameraHelper: supportedPreviewSize: 1280x720
2019-08-02 13:16:08.669 16407-16407/com.wsy.glcamerademo I/CameraHelper: supportedPreviewSize: 1440x1080
2019-08-02 13:16:08.669 16407-16407/com.wsy.glcamerademo I/CameraHelper: supportedPreviewSize: 1088x1088
2019-08-02 13:16:08.670 16407-16407/com.wsy.glcamerademo I/CameraHelper: supportedPreviewSize: 1056x864
2019-08-02 13:16:08.670 16407-16407/com.wsy.glcamerademo I/CameraHelper: supportedPreviewSize: 960x720
2019-08-02 13:16:08.670 16407-16407/com.wsy.glcamerademo I/CameraHelper: supportedPreviewSize: 720x480
2019-08-02 13:16:08.670 16407-16407/com.wsy.glcamerademo I/CameraHelper: supportedPreviewSize: 640x480
2019-08-02 13:16:08.670 16407-16407/com.wsy.glcamerademo I/CameraHelper: supportedPreviewSize: 352x288
2019-08-02 13:16:08.670 16407-16407/com.wsy.glcamerademo I/CameraHelper: supportedPreviewSize: 320x240
2019-08-02 13:16:08.670 16407-16407/com.wsy.glcamerademo I/CameraHelper: supportedPreviewSize: 176x144
其中 1:1 的预览尺寸为：1088×1088。
在使用 Camera2 API 时，其支持的预览尺寸（其实也包含了 PictureSize）如下：
2019-08-02 13:19:24.980 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 4128x3096
2019-08-02 13:19:24.980 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 4128x2322
2019-08-02 13:19:24.980 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 3264x2448
2019-08-02 13:19:24.980 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 3264x1836
2019-08-02 13:19:24.980 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 3024x3024
2019-08-02 13:19:24.980 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 2976x2976
2019-08-02 13:19:24.980 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 2880x2160
2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 2592x1944
2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 2560x1920
2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 2560x1440
2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 2560x1080
2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 2160x2160
2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 2048x1536
2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 2048x1152
2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 1936x1936
2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 1920x1080
2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 1440x1080
2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 1280x960
2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 1280x720
2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 960x720
2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 720x480
2019-08-02 13:19:24.981 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 640x480
2019-08-02 13:19:24.982 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 320x240
2019-08-02 13:19:24.982 16768-16768/com.wsy.glcamerademo I/Camera2Helper: getBestSupportedSize: 176x144
其中 1:1 的预览尺寸为：3024×3024、2976×2976、2160×2160、1936×1936。
只要我们选择 1:1 的预览尺寸，再将预览控件设置为正方形，即可实现正方形预览；
再通过设置预览控件的圆角为边长的一半，即可实现圆形预览。2. 设备不支持 1:1 预览尺寸的情况
选择 1:1 预览尺寸的缺陷分析
分辨率局限性
上述说到，我们可以选择 1:1 的预览尺寸进行预览，但是局限性较高，
可选择范围都很小。如果相机不支持 1:1 的预览尺寸，这个方案就不可行了。
资源消耗
以 Samsung tab S3 为例，该设备使用 Camera2 API 时，支持的正方形预览尺寸都很大，在进行图像处理等操作时将占用较多系统资源。
处理不支持 1:1 预览尺寸的情况
添加一个 1:1 尺寸的 ViewGroup
将 TextureView 放入 ViewGroup
设置 TextureView 的 margin 值以达到显示中心正方形区域的效果
示意图
示例代码
// 将预览控件和预览尺寸比例保持一致，避免拉伸
{FrameLayout.LayoutParams textureViewLayoutParams = (FrameLayout.LayoutParams) textureView.getLayoutParams();
int newHeight = 0;
int newWidth = textureViewLayoutParams.width;
// 横屏
if (displayOrientation % 180 == 0) {newHeight = textureViewLayoutParams.width * previewSize.height / previewSize.width;}
// 竖屏
else {newHeight = textureViewLayoutParams.width * previewSize.width / previewSize.height;}
//// 当不是正方形预览的情况下，添加一层 ViewGroup 限制 View 的显示区域
if (newHeight != textureViewLayoutParams.height) {insertFrameLayout = new RoundFrameLayout(CoverByParentCameraActivity.this);
int sideLength = Math.min(newWidth, newHeight);
FrameLayout.LayoutParams layoutParams = new FrameLayout.LayoutParams(sideLength, sideLength);
insertFrameLayout.setLayoutParams(layoutParams);
FrameLayout parentView = (FrameLayout) textureView.getParent();
parentView.removeView(textureView);
parentView.addView(insertFrameLayout);
insertFrameLayout.addView(textureView);
FrameLayout.LayoutParams newTextureViewLayoutParams = new FrameLayout.LayoutParams(newWidth, newHeight);
// 横屏
if (displayOrientation % 180 == 0) {newTextureViewLayoutParams.leftMargin = ((newHeight - newWidth) / 2);
}
// 竖屏
else {newTextureViewLayoutParams.topMargin = -(newHeight - newWidth) / 2;
}
textureView.setLayoutParams(newTextureViewLayoutParams);
}
}
三、使用 GLSurfaceView 进行自定义程度更高的预览
使用上面的方法操作已经可完成正方形和圆形预览，但是仅适用于原生相机，当我们的数据源并非是原生相机的情况时如何进行圆形预览？接下来介绍使用 GLSurfaceView 显示 NV21 的方案，完全是自己实现预览数据的绘制。
1. GLSurfaceView 使用流程
OpenGL 渲染 YUV 数据流程
其中的重点是渲染器（Renderer）的编写，Renderer 的介绍如下：
/**
* A generic renderer interface.
* <p>
* The renderer is responsible for making OpenGL calls to render a frame.
* <p>
* GLSurfaceView clients typically create their own classes that implement
* this interface, and then call {@link GLSurfaceView#setRenderer} to
* register the renderer with the GLSurfaceView.
* <p>
*
* <div class="special reference">
* <h3>Developer Guides</h3>
* <p>For more information about how to use OpenGL, read the
* <a href="{@docRoot}guide/topics/graphics/opengl.html">OpenGL</a> developer guide.</p>
* </div>
*
* <h3>Threading</h3>
* The renderer will be called on a separate thread, so that rendering
* performance is decoupled from the UI thread. Clients typically need to
* communicate with the renderer from the UI thread, because that's where
* input events are received. Clients can communicate using any of the
* standard Java techniques for cross-thread communication, or they can
* use the {@link GLSurfaceView#queueEvent(Runnable)} convenience method.
* <p>
* <h3>EGL Context Lost</h3>
* There are situations where the EGL rendering context will be lost. This
* typically happens when device wakes up after going to sleep. When
* the EGL context is lost, all OpenGL resources (such as textures) that are
* associated with that context will be automatically deleted. In order to
* keep rendering correctly, a renderer must recreate any lost resources
* that it still needs. The {@link #onSurfaceCreated(GL10, EGLConfig)} method
* is a convenient place to do this.
*
*
* @see #setRenderer(Renderer)
*/
public interface Renderer {
/**
* Called when the surface is created or recreated.
* <p>
* Called when the rendering thread
* starts and whenever the EGL context is lost. The EGL context will typically
* be lost when the Android device awakes after going to sleep.
* <p>
* Since this method is called at the beginning of rendering, as well as
* every time the EGL context is lost, this method is a convenient place to put
* code to create resources that need to be created when the rendering
* starts, and that need to be recreated when the EGL context is lost.
* Textures are an example of a resource that you might want to create
* here.
* <p>
* Note that when the EGL context is lost, all OpenGL resources associated
* with that context will be automatically deleted. You do not need to call
* the corresponding "glDelete" methods such as glDeleteTextures to
* manually delete these lost resources.
* <p>
* @param gl the GL interface. Use <code>instanceof</code> to
* test if the interface supports GL11 or higher interfaces.
* @param config the EGLConfig of the created surface. Can be used
* to create matching pbuffers.
*/
void onSurfaceCreated(GL10 gl, EGLConfig config);
/**
* Called when the surface changed size.
* <p>
* Called after the surface is created and whenever
* the OpenGL ES surface size changes.
* <p>
* Typically you will set your viewport here. If your camera
* is fixed then you could also set your projection matrix here:
* <pre class="prettyprint">
* void onSurfaceChanged(GL10 gl, int width, int height) {* gl.glViewport(0, 0, width, height);
* // for a fixed camera, set the projection too
* float ratio = (float) width / height;
* gl.glMatrixMode(GL10.GL_PROJECTION);
* gl.glLoadIdentity();
* gl.glFrustumf(-ratio, ratio, -1, 1, 1, 10);
* }
* </pre>
* @param gl the GL interface. Use <code>instanceof</code> to
* test if the interface supports GL11 or higher interfaces.
* @param width
* @param height
*/
void onSurfaceChanged(GL10 gl, int width, int height);
/**
* Called to draw the current frame.
* <p>
* This method is responsible for drawing the current frame.
* <p>
* The implementation of this method typically looks like this:
* <pre class="prettyprint">
* void onDrawFrame(GL10 gl) {* gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT);
* //... other gl calls to render the scene ...
* }
* </pre>
* @param gl the GL interface. Use <code>instanceof</code> to
* test if the interface supports GL11 or higher interfaces.
*/
void onDrawFrame(GL10 gl);
}
void onSurfaceCreated(GL10 gl, EGLConfig config)
在 Surface 创建或重建的情况下回调
void onSurfaceChanged(GL10 gl, int width, int height)
在 Surface 的大小发生变化的情况下回调
void onDrawFrame(GL10 gl)
在这里实现绘制操作。当我们设置的 renderMode 为 RENDERMODE_CONTINUOUSLY 时，该函数将不断地执行；
当我们设置的 renderMode 为 RENDERMODE_WHEN_DIRTY 时，将只在创建完成和调用 requestRender 后才执行。一般我们选择 RENDERMODE_WHEN_DIRTY 渲染模式，避免过度绘制。
一般情况下，我们会自己实现一个 Renderer，然后为 GLSurfaceView 设置 Renderer，可以说，Renderer 的编写是整个流程的核心步骤。以下是在 void onSurfaceCreated(GL10 gl, EGLConfig config)进行的初始化操作和在 void onDrawFrame(GL10 gl)进行的绘制操作的流程图：
渲染 YUV 数据的 Renderer
2. 具体实现
坐标系介绍
Android View 坐标系
OpenGL 世界坐标系
如图所示，和 Android 的 View 坐标系不同，OpenGL 的坐标系是笛卡尔坐标系。
Android View 的坐标系以左上角为原点，向右 x 递增，向下 y 递增；
而 OpenGL 坐标系以中心为原点，向右 x 递增，向上 y 递增。
着色器编写
/**
* 顶点着色器
*/
private static String VERTEX_SHADER =
"attribute vec4 attr_position;\n" +
"attribute vec2 attr_tc;\n" +
"varying vec2 tc;\n" +
"void main() {\n" +
"gl_Position = attr_position;\n" +
"tc = attr_tc;\n" +
"}";
/**
* 片段着色器
*/
private static String FRAG_SHADER =
"varying vec2 tc;\n" +
"uniform sampler2D ySampler;\n" +
"uniform sampler2D uSampler;\n" +
"uniform sampler2D vSampler;\n" +
"const mat3 convertMat = mat3(1.0, 1.0, 1.0, -0.001, -0.3441, 1.772, 1.402, -0.7141, -0.58060);\n" +
"void main()\n" +
"{\n" +
"vec3 yuv;\n" +
"yuv.x = texture2D(ySampler, tc).r;\n" +
"yuv.y = texture2D(uSampler, tc).r - 0.5;\n" +
"yuv.z = texture2D(vSampler, tc).r - 0.5;\n" +
"gl_FragColor = vec4(convertMat * yuv, 1.0);\n" +
"}";
内建变量解释
gl_Position
VERTEX_SHADER代码里的 gl_Position 代表绘制的空间坐标。由于我们是二维绘制，所以直接传入 OpenGL 二维坐标系的左下(-1,-1)、右下(1,-1)、左上(-1,1)、右上(1,1)，也就是{-1,-1,1,-1,-1,1,1,1}
gl_FragColor
FRAG_SHADER代码里的 gl_FragColor 代表单个片元的颜色
其他变量解释
ySampler、uSampler、vSampler
分别代表 Y、U、V 纹理采样器
convertMat
根据以下公式：
R = Y + 1.402 (V - 128)
G = Y - 0.34414 (U - 128) - 0.71414 (V - 128)
B = Y + 1.772 (U - 128)
我们可得到一个 YUV 转 RGB 的矩阵
1.0, 1.0, 1.0,
0, -0.344, 1.77,
1.403, -0.714, 0
部分类型、函数的解释
vec3、vec4
分别代表三维向量、四维向量。
vec4 texture2D(sampler2D sampler, vec2 coord)
以指定的矩阵将采样器的图像纹理转换为颜色值；如：texture2D(ySampler, tc).r获取到的是 Y 数据，texture2D(uSampler, tc).r获取到的是 U 数据，texture2D(vSampler, tc).r获取到的是 V 数据。
在 Java 代码中进行初始化
根据图像宽高创建 Y、U、V 对应的 ByteBuffer 纹理数据；
根据是否镜像显示、旋转角度选择对应的转换矩阵；
public void init(boolean isMirror, int rotateDegree, int frameWidth, int frameHeight) {
if (this.frameWidth == frameWidth
&& this.frameHeight == frameHeight
&& this.rotateDegree == rotateDegree
&& this.isMirror == isMirror) {return;}
dataInput = false;
this.frameWidth = frameWidth;
this.frameHeight = frameHeight;
this.rotateDegree = rotateDegree;
this.isMirror = isMirror;
yArray = new byte[this.frameWidth * this.frameHeight];
uArray = new byte[this.frameWidth * this.frameHeight / 4];
vArray = new byte[this.frameWidth * this.frameHeight / 4];
int yFrameSize = this.frameHeight * this.frameWidth;
int uvFrameSize = yFrameSize >> 2;
yBuf = ByteBuffer.allocateDirect(yFrameSize);
yBuf.order(ByteOrder.nativeOrder()).position(0);
uBuf = ByteBuffer.allocateDirect(uvFrameSize);
uBuf.order(ByteOrder.nativeOrder()).position(0);
vBuf = ByteBuffer.allocateDirect(uvFrameSize);
vBuf.order(ByteOrder.nativeOrder()).position(0);
// 顶点坐标
squareVertices = ByteBuffer
.allocateDirect(GLUtil.SQUARE_VERTICES.length * FLOAT_SIZE_BYTES)
.order(ByteOrder.nativeOrder())
.asFloatBuffer();
squareVertices.put(GLUtil.SQUARE_VERTICES).position(0);
// 纹理坐标
if (isMirror) {switch (rotateDegree) {
case 0:
coordVertice = GLUtil.MIRROR_COORD_VERTICES;
break;
case 90:
coordVertice = GLUtil.ROTATE_90_MIRROR_COORD_VERTICES;
break;
case 180:
coordVertice = GLUtil.ROTATE_180_MIRROR_COORD_VERTICES;
break;
case 270:
coordVertice = GLUtil.ROTATE_270_MIRROR_COORD_VERTICES;
break;
default:
break;
}
} else {switch (rotateDegree) {
case 0:
coordVertice = GLUtil.COORD_VERTICES;
break;
case 90:
coordVertice = GLUtil.ROTATE_90_COORD_VERTICES;
break;
case 180:
coordVertice = GLUtil.ROTATE_180_COORD_VERTICES;
break;
case 270:
coordVertice = GLUtil.ROTATE_270_COORD_VERTICES;
break;
default:
break;
}
}
coordVertices = ByteBuffer.allocateDirect(coordVertice.length * FLOAT_SIZE_BYTES).order(ByteOrder.nativeOrder()).asFloatBuffer();
coordVertices.put(coordVertice).position(0);}
在 Surface 创建完成时进行 Renderer 初始化
private void initRenderer() {
rendererReady = false;
createGLProgram();
// 启用纹理
GLES20.glEnable(GLES20.GL_TEXTURE_2D);
// 创建纹理
createTexture(frameWidth, frameHeight, GLES20.GL_LUMINANCE, yTexture);
createTexture(frameWidth / 2, frameHeight / 2, GLES20.GL_LUMINANCE, uTexture);
createTexture(frameWidth / 2, frameHeight / 2, GLES20.GL_LUMINANCE, vTexture);
rendererReady = true;
}
其中 createGLProgram 用于创建 OpenGL Program 并关联着色器代码中的变量
private void createGLProgram() {int programHandleMain = GLUtil.createShaderProgram();
if (programHandleMain != -1) {
// 使用着色器程序
GLES20.glUseProgram(programHandleMain);
// 获取顶点着色器变量
int glPosition = GLES20.glGetAttribLocation(programHandleMain, "attr_position");
int textureCoord = GLES20.glGetAttribLocation(programHandleMain, "attr_tc");
// 获取片段着色器变量
int ySampler = GLES20.glGetUniformLocation(programHandleMain, "ySampler");
int uSampler = GLES20.glGetUniformLocation(programHandleMain, "uSampler");
int vSampler = GLES20.glGetUniformLocation(programHandleMain, "vSampler");
// 给变量赋值
/**
* GLES20.GL_TEXTURE0 和 ySampler 绑定
* GLES20.GL_TEXTURE1 和 uSampler 绑定
* GLES20.GL_TEXTURE2 和 vSampler 绑定
*
* 也就是说 glUniform1i 的第二个参数代表图层序号
*/
GLES20.glUniform1i(ySampler, 0);
GLES20.glUniform1i(uSampler, 1);
GLES20.glUniform1i(vSampler, 2);
GLES20.glEnableVertexAttribArray(glPosition);
GLES20.glEnableVertexAttribArray(textureCoord);
/**
* 设置 Vertex Shader 数据
*/
squareVertices.position(0);
GLES20.glVertexAttribPointer(glPosition, GLUtil.COUNT_PER_SQUARE_VERTICE, GLES20.GL_FLOAT, false, 8, squareVertices);
coordVertices.position(0);
GLES20.glVertexAttribPointer(textureCoord, GLUtil.COUNT_PER_COORD_VERTICES, GLES20.GL_FLOAT, false, 8, coordVertices);
}}
其中 createTexture 用于根据宽高和格式创建纹理
private void createTexture(int width, int height, int format, int[] textureId) {
// 创建纹理
GLES20.glGenTextures(1, textureId, 0);
// 绑定纹理
GLES20.glBindTexture(GLES20.GL_TEXTURE_2D, textureId[0]);
/**
* {@link GLES20#GL_TEXTURE_WRAP_S}代表左右方向的纹理环绕模式
* {@link GLES20#GL_TEXTURE_WRAP_T}代表上下方向的纹理环绕模式
*
* {@link GLES20#GL_REPEAT}：重复
* {@link GLES20#GL_MIRRORED_REPEAT}：镜像重复
* {@link GLES20#GL_CLAMP_TO_EDGE}：忽略边框截取
*
* 例如我们使用{@link GLES20#GL_REPEAT}：*
* squareVertices coordVertices
* -1.0f, -1.0f, 1.0f, 1.0f,
* 1.0f, -1.0f, 1.0f, 0.0f, -> 和 textureView 预览相同
* -1.0f, 1.0f, 0.0f, 1.0f,
* 1.0f, 1.0f 0.0f, 0.0f
*
* squareVertices coordVertices
* -1.0f, -1.0f, 2.0f, 2.0f,
* 1.0f, -1.0f, 2.0f, 0.0f, -> 和 textureView 预览相比，分割成了 4 块相同的预览（左下，右下，左上，右上）* -1.0f, 1.0f, 0.0f, 2.0f,
* 1.0f, 1.0f 0.0f, 0.0f
*/
GLES20.glTexParameteri(GLES20.GL_TEXTURE_2D, GLES20.GL_TEXTURE_WRAP_S, GLES20.GL_REPEAT);
GLES20.glTexParameteri(GLES20.GL_TEXTURE_2D, GLES20.GL_TEXTURE_WRAP_T, GLES20.GL_REPEAT);
/**
* {@link GLES20#GL_TEXTURE_MIN_FILTER}代表所显示的纹理比加载进来的纹理小时的情况
* {@link GLES20#GL_TEXTURE_MAG_FILTER}代表所显示的纹理比加载进来的纹理大时的情况
*
* {@link GLES20#GL_NEAREST}：使用纹理中坐标最接近的一个像素的颜色作为需要绘制的像素颜色
* {@link GLES20#GL_LINEAR}：使用纹理中坐标最接近的若干个颜色，通过加权平均算法得到需要绘制的像素颜色
*/
GLES20.glTexParameteri(GLES20.GL_TEXTURE_2D, GLES20.GL_TEXTURE_MIN_FILTER, GLES20.GL_NEAREST);
GLES20.glTexParameteri(GLES20.GL_TEXTURE_2D, GLES20.GL_TEXTURE_MAG_FILTER, GLES20.GL_LINEAR);
GLES20.glTexImage2D(GLES20.GL_TEXTURE_2D, 0, format, width, height, 0, format, GLES20.GL_UNSIGNED_BYTE, null);
}
在 Java 代码中调用绘制
在数据源获取到时裁剪并传入帧数据
@Override
public void onPreview(final byte[] nv21, Camera camera) {
// 裁剪指定的图像区域
ImageUtil.cropNV21(nv21, this.squareNV21, previewSize.width, previewSize.height, cropRect);
// 刷新 GLSurfaceView
roundCameraGLSurfaceView.refreshFrameNV21(this.squareNV21);}
NV21 数据裁剪代码
/**
* 裁剪 NV21 数据
*
* @param originNV21 原始的 NV21 数据
* @param cropNV21 裁剪结果 NV21 数据，需要预先分配内存
* @param width 原始数据的宽度
* @param height 原始数据的高度
* @param left 原始数据被裁剪的区域的左边界
* @param top 原始数据被裁剪的区域的上边界
* @param right 原始数据被裁剪的区域的右边界
* @param bottom 原始数据被裁剪的区域的下边界
*/
public static void cropNV21(byte[] originNV21, byte[] cropNV21, int width, int height, int left, int top, int right, int bottom) {
int halfWidth = width / 2;
int cropImageWidth = right - left;
int cropImageHeight = bottom - top;
// 原数据 Y 左上
int originalYLineStart = top * width;
int targetYIndex = 0;
// 原数据 UV 左上
int originalUVLineStart = width * height + top * halfWidth;
// 目标数据的 UV 起始值
int targetUVIndex = cropImageWidth * cropImageHeight;
for (int i = top; i < bottom; i++) {System.arraycopy(originNV21, originalYLineStart + left, cropNV21, targetYIndex, cropImageWidth);
originalYLineStart += width;
targetYIndex += cropImageWidth;
if ((i & 1) == 0) {System.arraycopy(originNV21, originalUVLineStart + left, cropNV21, targetUVIndex, cropImageWidth);
originalUVLineStart += width;
targetUVIndex += cropImageWidth;
}
}}
传给 GLSurafceView 并刷新帧数据
/**
* 传入 NV21 刷新帧
*
* @param data NV21 数据
*/
public void refreshFrameNV21(byte[] data) {if (rendererReady) {yBuf.clear();
uBuf.clear();
vBuf.clear();
putNV21(data, frameWidth, frameHeight);
dataInput = true;
requestRender();}}
其中 putNV21 用于将 NV21 中的 Y、U、V 数据分别取出
/**
* 将 NV21 数据的 Y、U、V 分量取出
*
* @param src nv21 帧数据
* @param width 宽度
* @param height 高度
*/
private void putNV21(byte[] src, int width, int height) {
int ySize = width * height;
int frameSize = ySize * 3 / 2;
// 取分量 y 值
System.arraycopy(src, 0, yArray, 0, ySize);
int k = 0;
// 取分量 uv 值
int index = ySize;
while (index < frameSize) {vArray[k] = src[index++];
uArray[k++] = src[index++];
}
yBuf.put(yArray).position(0);
uBuf.put(uArray).position(0);
vBuf.put(vArray).position(0);}
在执行 requestRender 后，onDrawFrame 函数将被回调，在其中进行三个纹理的数据绑定并绘制
@Override
public void onDrawFrame(GL10 gl) {
// 分别对每个纹理做激活、绑定、设置数据操作
if (dataInput) {
//y
GLES20.glActiveTexture(GLES20.GL_TEXTURE0);
GLES20.glBindTexture(GLES20.GL_TEXTURE_2D, yTexture[0]);
GLES20.glTexSubImage2D(GLES20.GL_TEXTURE_2D,
0,
0,
0,
frameWidth,
frameHeight,
GLES20.GL_LUMINANCE,
GLES20.GL_UNSIGNED_BYTE,
yBuf);
//u
GLES20.glActiveTexture(GLES20.GL_TEXTURE1);
GLES20.glBindTexture(GLES20.GL_TEXTURE_2D, uTexture[0]);
GLES20.glTexSubImage2D(GLES20.GL_TEXTURE_2D,
0,
0,
0,
frameWidth >> 1,
frameHeight >> 1,
GLES20.GL_LUMINANCE,
GLES20.GL_UNSIGNED_BYTE,
uBuf);
//v
GLES20.glActiveTexture(GLES20.GL_TEXTURE2);
GLES20.glBindTexture(GLES20.GL_TEXTURE_2D, vTexture[0]);
GLES20.glTexSubImage2D(GLES20.GL_TEXTURE_2D,
0,
0,
0,
frameWidth >> 1,
frameHeight >> 1,
GLES20.GL_LUMINANCE,
GLES20.GL_UNSIGNED_BYTE,
vBuf);
// 在数据绑定完成后进行绘制
GLES20.glDrawArrays(GLES20.GL_TRIANGLE_STRIP, 0, 4);
}
}
即可完成绘制。
四、加一层边框
有时候需求并不仅仅是圆形预览这么简单，我们可能还要为相机预览加一层边框
边框效果
一样的思路，我们动态地修改边框值，并进行重绘。
边框自定义 View 中的相关代码如下：
@Override
protected void onDraw(Canvas canvas) {super.onDraw(canvas);
if (paint == null) {paint = new Paint();
paint.setStyle(Paint.Style.STROKE);
paint.setAntiAlias(true);
SweepGradient sweepGradient = new SweepGradient(((float) getWidth() / 2), ((float) getHeight() / 2),
new int[]{Color.GREEN, Color.CYAN, Color.BLUE, Color.CYAN, Color.GREEN}, null);
paint.setShader(sweepGradient);
}
drawBorder(canvas, 6);
}
private void drawBorder(Canvas canvas, int rectThickness) {if (canvas == null) {return;}
paint.setStrokeWidth(rectThickness);
Path drawPath = new Path();
drawPath.addRoundRect(new RectF(0, 0, getWidth(), getHeight()), radius, radius, Path.Direction.CW);
canvas.drawPath(drawPath, paint);
}
public void turnRound() {invalidate();
}
public void setRadius(int radius) {this.radius = radius;}
五、完整 Demo 代码：
https://github.com/wangshengy…
使用 Camera API 和 Camera2 API 并选择最接近正方形的预览尺寸
使用 Camera API 并为其动态添加一层父控件，达到正方形预览的效果
使用 Camera API 获取预览数据，使用 OpenGL 的方式进行显示最后，给大家推荐一个好用的 Android 免费离线人脸识别的 sdk，可以和本文实现技术的完美结合：https://ai.arcsoft.com.cn/thi…
正文完
发表至：无分类
2019-08-06
