最近搞了一台 M1 的 Mac mini 筹备用这个开发 mixphp v3 版本,之前尝试了几次没有编译胜利,明天再次尝试装置胜利了,网络上很多人的文章存在问题(可能是零碎环境不同),特此分享让后续的人闭坑。
面临的问题
因为最新版本的 macOS Big Sur 即使敞开平安模式 /usr/lib 也无奈写入文件,因而导致 make install 无奈装置任何 php 扩大,因而想装 Swoole 只能自行编译装置 php 到 /usr/local 目录
% csrutil status
System Integrity Protection status: disabled.
% mkdir /usr/lib/php/extensions/test
mkdir: /usr/lib/php/extensions/test: Read-only file system
PHP Build
因为 brew arm64 版本无奈应用,只能采纳 x64 版本装置了一些依赖,前面导致了很多问题,本想编译一个 x64 PHP+Swoole 在编译 x64 Swoole 的时候异样就没有持续了,转而钻研 arm64 PHP+Swoole
arch -x86_64 brew install openssl zlib curl libjpeg libpng libxml2 gettext freetype pcre libiconv libzip
参数中的门路都须要依据本人电脑所装置的理论门路替换
./configure --prefix=/usr/local/php8.0.7 --with-config-file-path=/usr/local/php8.0.7/etc --with-config-file-scan-dir=/usr/local/php8.0.7/etc/php.d --enable-fpm --with-fpm-user=www --with-fpm-group=www --with-mysqli=mysqlnd --with-pdo-mysql=mysqlnd --enable-xml --disable-rpath --enable-bcmath --enable-shmop --enable-sysvsem --enable-mbregex --enable-mbstring --enable-ftp --with-mhash --enable-tokenizer --enable-pcntl --enable-sockets --enable-soap --enable-simplexml --without-pear --with-pear --with-zlib=/usr/local/opt/zlib --with-curl=/usr/local/Cellar/curl/7.77.0 --with-openssl=/usr/local/Cellar/openssl@1.1/1.1.1k --with-iconv=/usr/local/Cellar/libiconv/1.16
make
PHP Build ERROR: No package 'openssl' found
须要编译装置 arm64:openssl (零碎自带的 LibreSSL 不能够)
基于 Mac Silicon M1 的 OpenSSL 编译:https://segmentfault.com/a/11…
sudo cp /usr/local/openssl/lib/pkgconfig/* /usr/local/lib/pkgconfig/
持续编译:php (将 --with-openssl
更换为 /usr/local/openssl)
PHP Build ERROR: configure: error: Please reinstall the iconv library
须要编译装置 arm64:iconv
wget http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.14.tar.gz
tar xvzf libiconv-1.14.tar.gz
cd libiconv-1.14
./configure --prefix=/usr/local/libiconv
make && sudo make install
持续编译:php (将 --with-iconv
更换为 /usr/local/libiconv)
PHP Build ERROR: ld: warning: ignoring file /usr/local/Cellar/oniguruma/6.9.7.1/lib/libonig.dylib, building for macOS-arm64 but attempting to link with file built for macOS-x86_64
须要编译装置 arm64:oniguruma
wget https://github.com/kkos/oniguruma/archive/v6.9.5_rev1.tar.gz
tar xvzf v6.9.5_rev1.tar.gz
cd oniguruma-6.9.5_rev1
./autogen.sh
Oniguruma Build ERROR: autoreconf: error: aclocal failed with exit status: 2
须要装置:automake,装置了一个 x64 的也能够用
arch -x86_64 brew install automake
持续编译:oniguruma
./autogen.sh
./configure --prefix=/usr/local/oniguruma
make && sudo make install
移除 x64 oniguruma 将 arm64 oniguruma 关联到零碎
arch -x86_64 brew uninstall oniguruma
sudo cp /usr/local/oniguruma/lib/pkgconfig/* /usr/local/lib/pkgconfig/
sudo cp /usr/local/oniguruma/include/* /usr/local/include/
export LDFLAGS="-L/usr/local/oniguruma/lib"
export CPPFLAGS="-I/usr/local/oniguruma/include"
export PKG_CONFIG_PATH="/usr/local/oniguruma/lib/pkgconfig"
make clean
./configure --prefix=/usr/local/php8.0.7 --with-config-file-path=/usr/local/php8.0.7/etc --with-config-file-scan-dir=/usr/local/php8.0.7/etc/php.d --enable-fpm --with-fpm-user=www --with-fpm-group=www --with-mysqli=mysqlnd --with-pdo-mysql=mysqlnd --enable-xml --disable-rpath --enable-bcmath --enable-shmop --enable-sysvsem --enable-mbregex --enable-mbstring --enable-ftp --with-mhash --enable-tokenizer --enable-pcntl --enable-sockets --enable-soap --enable-simplexml --without-pear --with-pear --with-zlib=/usr/local/opt/zlib --with-curl=/usr/local/Cellar/curl/7.77.0 --with-openssl=/usr/local/openssl --with-iconv=/usr/local/libiconv
make && sudo make install
PHP Build ERROR: PEAR package PHP_Archive not installed: generated phar will require PHP's phar extension be enabled.
减少 --disable-phar
./configure --prefix=/usr/local/php8.0.7 --with-config-file-path=/usr/local/php8.0.7/etc --with-config-file-scan-dir=/usr/local/php8.0.7/etc/php.d --enable-fpm --with-fpm-user=www --with-fpm-group=www --with-mysqli=mysqlnd --with-pdo-mysql=mysqlnd --enable-xml --disable-rpath --enable-bcmath --enable-shmop --enable-sysvsem --enable-mbregex --enable-mbstring --enable-ftp --with-mhash --enable-tokenizer --enable-pcntl --enable-sockets --enable-soap --enable-simplexml --without-pear --with-pear --disable-phar --with-zlib=/usr/local/opt/zlib --with-curl=/usr/local/Cellar/curl/7.77.0 --with-openssl=/usr/local/openssl --with-iconv=/usr/local/libiconv
sudo make clean && sudo make && sudo make install
Swoole Build
减少一个 --enable-thread-context
,并指定 --with-openssl
为编译版本的门路
wget https://github.com/swoole/swoole-src/archive/refs/tags/v4.6.7.tar.gz
tar xvzf v4.6.7.tar.gz
cd swoole-src-4.6.7
./configure --with-php-config=/usr/local/php8.0.7/bin/php-config --enable-openssl --enable-http2 --enable-thread-context --with-openssl-dir=/usr/local/openssl
make && sudo make install