这一章就来讲讲 React 在协调阶段的 beginWork 外面次要做的事件 — dom diff。
本文次要讲的是 React17.0.2 版本的diff，在此我也画了一个简略的流程图：
reconcileChildren
dom diff的入口函数就是reconcileChildren，那么他的源码如下：
//packages/react-reconciler/src/ReactFiberBeginWork.old.js
export function reconcileChildren(
current: Fiber | null,// 以后的 fiber 节点
workInProgress: Fiber,// 新生成的 fiber
nextChildren: any,// 新生成的 reactElement 内容
renderLanes: Lanes,// 渲染优先级
) {if (current === null) {
// 如果没有曾经渲染的 fiber 树，则间接把 reactElement 内容渲染下来
// If this is a fresh new component that hasn't been rendered yet, we
// won't update its child set by applying minimal side-effects. Instead,
// we will add them all to the child before it gets rendered. That means
// we can optimize this reconciliation pass by not tracking side-effects.
workInProgress.child = mountChildFibers(
workInProgress,
null,
nextChildren,
renderLanes,
);
} else {
// If the current child is the same as the work in progress, it means that
// we haven't yet started any work on these children. Therefore, we use
// the clone algorithm to create a copy of all the current children.
// If we had any progressed work already, that is invalid at this point so
// let's throw it out.
workInProgress.child = reconcileChildFibers(
workInProgress,
current.child,
nextChildren,
renderLanes,
);
}
}reconcileChildren的源码并不长，次要做了两件事
- 如果是首次渲染，则会把曾经解决好的
fiber树进行挂载。 - 如果不是首次渲染则调用
reconcileChildFibers进行下一步解决。
咱们关注一下 mountChildFibers 和reconcileChildFibers，咱们发现这两个函数别离指向 ChildReconciler，只是mountChildFibers 的参数为 false，reconcileChildFibers 的参数为true。咱们在这里先埋下一个点，看看这个参数对前期的流程有什么影响。
咱们持续深刻能够发现，ChildReconciler这个函数冰的执行返回了 reconcileChildFibers，所以这便是reconcileChildren 的外围性能代码所在了。
reconcileChildFibers
function reconcileChildFibers(returnFiber: Fiber, currentFirstChild: Fiber | null, newChild: any, lanes: Lanes,): Fiber | null {
// This function is not recursive.
// If the top level item is an array, we treat it as a set of children,
// not as a fragment. Nested arrays on the other hand will be treated as
// fragment nodes. Recursion happens at the normal flow.
// Handle top level unkeyed fragments as if they were arrays.
// This leads to an ambiguity between <>{[...]}</> and <>...</>.
// We treat the ambiguous cases above the same.
const isUnkeyedTopLevelFragment =
typeof newChild === 'object' &&
newChild !== null &&
newChild.type === REACT_FRAGMENT_TYPE &&
newChild.key === null;
if (isUnkeyedTopLevelFragment) {newChild = newChild.props.children;}
// Handle object types
const isObject = typeof newChild === 'object' && newChild !== null;
// 解决对象类型
if (isObject) {switch (newChild.$$typeof) {
// REACT_ELEMENT_TYPE 类型
case REACT_ELEMENT_TYPE:
return placeSingleChild(
reconcileSingleElement(
returnFiber,
currentFirstChild,
newChild,
lanes,
),
);
// REACT_PORTAL_TYPE 类型
case REACT_PORTAL_TYPE:
return placeSingleChild(
reconcileSinglePortal(
returnFiber,
currentFirstChild,
newChild,
lanes,
),
);
// REACT_LAZY_TYPE 类型
case REACT_LAZY_TYPE:
if (enableLazyElements) {
const payload = newChild._payload;
const init = newChild._init;
// TODO: This function is supposed to be non-recursive.
return reconcileChildFibers(
returnFiber,
currentFirstChild,
init(payload),
lanes,
);
}
}
}
// 字符串与数字类型
if (typeof newChild === 'string' || typeof newChild === 'number') {
return placeSingleChild(
reconcileSingleTextNode(
returnFiber,
currentFirstChild,
'' + newChild,
lanes,
),
);
}
// 数组类型
if (isArray(newChild)) {
return reconcileChildrenArray(
returnFiber,
currentFirstChild,
newChild,
lanes,
);
}
// 可迭代的类型
if (getIteratorFn(newChild)) {
return reconcileChildrenIterator(
returnFiber,
currentFirstChild,
newChild,
lanes,
);
}
if (isObject) {throwOnInvalidObjectType(returnFiber, newChild);
}
if (__DEV__) {if (typeof newChild === 'function') {warnOnFunctionType(returnFiber);
}
}
if (typeof newChild === 'undefined' && !isUnkeyedTopLevelFragment) {
// If the new child is undefined, and the return fiber is a composite
// component, throw an error. If Fiber return types are disabled,
// we already threw above.
switch (returnFiber.tag) {
case ClassComponent: {if (__DEV__) {
const instance = returnFiber.stateNode;
if (instance.render._isMockFunction) {
// We allow auto-mocks to proceed as if they're returning null.
break;
}
}
}
// Intentionally fall through to the next case, which handles both
// functions and classes
// eslint-disable-next-lined no-fallthrough
case Block:
case FunctionComponent:
case ForwardRef:
case SimpleMemoComponent: {
invariant(
false,
'%s(...): Nothing was returned from render. This usually means a' +
'return statement is missing. Or, to render nothing,' +
'return null.',
getComponentName(returnFiber.type) || 'Component',
);
}
}
}
// Remaining cases are all treated as empty.
return deleteRemainingChildren(returnFiber, currentFirstChild);
}reconcileChildFibers中咱们依据入参 newChild 的类型别离对应着不同的解决:
- 当批改的内容为
REACT_ELEMENT_TYPE类型，调用reconcileSingleElement函数。 - 当批改的内容为
REACT_PORTAL_TYPE类型，调用reconcileSinglePortal函数。 - 当批改的内容为
REACT_LAZY_TYPE类型，递归调用reconcileChildFibers函数。 - 当批改的内容问
纯文本类型，调用reconcileSingleTextNode函数。 - 当批改的内容为
数组类型，调用reconcileChildrenArray函数。 - 当批改的内容为
可迭代类型，调用reconcileChildrenIterator函数 - 参考 React 实战视频解说：进入学习
reconcileSingleElement
reconcileSingleElement的源码如下：
function reconcileSingleElement(
returnFiber: Fiber,// 父级
currentFirstChild: Fiber | null, // 父级下 diff 的第一个
element: ReactElement, // 以后元素
lanes: Lanes, // 优先级
): Fiber {
const key = element.key;
let child = currentFirstChild;
while (child !== null) {
// TODO: If key === null and child.key === null, then this only applies to
// the first item in the list.
if (child.key === key) {switch (child.tag) {
// 如果为 Fragment 类型，并且 key 也相等
case Fragment: {if (element.type === REACT_FRAGMENT_TYPE) {
// get 前面的兄弟节点增加 Deletion 标记，用于 dom 删除
deleteRemainingChildren(returnFiber, child.sibling);
// 通过 useFiber 复用旧 fiber 与新的 props
const existing = useFiber(child, element.props.children);
existing.return = returnFiber;
if (__DEV__) {
existing._debugSource = element._source;
existing._debugOwner = element._owner;
}
return existing;
}
break;
}
case Block:
if (enableBlocksAPI) {
let type = element.type;
if (type.$$typeof === REACT_LAZY_TYPE) {type = resolveLazyType(type);
}
if (type.$$typeof === REACT_BLOCK_TYPE) {
// The new Block might not be initialized yet. We need to initialize
// it in case initializing it turns out it would match.
if (((type: any): BlockComponent<any, any>)._render ===
(child.type: BlockComponent<any, any>)._render
) {deleteRemainingChildren(returnFiber, child.sibling);
const existing = useFiber(child, element.props);
existing.type = type;
existing.return = returnFiber;
if (__DEV__) {
existing._debugSource = element._source;
existing._debugOwner = element._owner;
}
return existing;
}
}
}
// We intentionally fallthrough here if enableBlocksAPI is not on.
// eslint-disable-next-lined no-fallthrough
default: {
if (
// 新的 ReactElement 与旧的 current fiber 的 key 与 type 都雷同
child.elementType === element.type ||
// Keep this check inline so it only runs on the false path:
(__DEV__
? isCompatibleFamilyForHotReloading(child, element)
: false)
) {
// 增加标记
deleteRemainingChildren(returnFiber, child.sibling);
const existing = useFiber(child, element.props);
existing.ref = coerceRef(returnFiber, child, element);
existing.return = returnFiber;
if (__DEV__) {
existing._debugSource = element._source;
existing._debugOwner = element._owner;
}
return existing;
}
break;
}
}
// 匹配不上，key 相等，type 不相等，移除旧的 fiber 以及前面的兄弟
deleteRemainingChildren(returnFiber, child);
break;
}
else
{
// 如果 key 不同，则标记 Deletion,
deleteChild(returnFiber, child);
}
// 遍历其兄弟
child = child.sibling;
}
if (element.type === REACT_FRAGMENT_TYPE) {
// 如果是 fragment 类型，创立 fragment，并返回。const created = createFiberFromFragment(
element.props.children,
returnFiber.mode,
lanes,
element.key,
);
created.return = returnFiber;
return created;
} else {
// 如果不是 fragment，创立 element 并返回 fiber
const created = createFiberFromElement(element, returnFiber.mode, lanes);
created.ref = coerceRef(returnFiber, currentFirstChild, element);
created.return = returnFiber;
return created;
}
}依据源码，reconcileSingleElement函数中会遍历以后父级 fiber 上面的所有子 fiber，依据旧的fiber 与新生成的 ReactElement 的 key 和type进行比拟：
- 如果旧的
fiber子节点与新的子节点的key和type不统一，给以后的旧的fiber子节点增加上Deletion标记，持续遍历其兄弟节点。 - 如果旧的
fiber子节点与新的子节点的key是统一的，就会依据以后的节点类型去做匹配解决，通过deleteRemainingChildren给以后子节点以及前面的所有的兄弟节点增加上Deletion标记，并且通过useFiber复用该子节点和该子节点新的props。 - 如果旧的
fiber子节点与新的子节点的类型匹配不上，则会间接给旧的fiber子节点打上Deletion标记，移除子节点以及前面的所有兄弟节点。 - 如果旧的
fiber树遍历结束，然而发现还没有匹配完的节点，那么会通过createFiberFromFragment，createFiberFromElement创立新的fiber节点，并指向父级fiber。
reconcileSingPortal
function reconcileSinglePortal(returnFiber: Fiber, currentFirstChild: Fiber | null, portal: ReactPortal, lanes: Lanes,): Fiber {
const key = portal.key;
let child = currentFirstChild;
while (child !== null) {
// TODO: If key === null and child.key === null, then this only applies to
// the first item in the list.
if (child.key === key) {
if (
child.tag === HostPortal &&
child.stateNode.containerInfo === portal.containerInfo &&
child.stateNode.implementation === portal.implementation
) {deleteRemainingChildren(returnFiber, child.sibling);
const existing = useFiber(child, portal.children || []);
existing.return = returnFiber;
return existing;
} else {deleteRemainingChildren(returnFiber, child);
break;
}
} else {deleteChild(returnFiber, child);
}
child = child.sibling;
}
const created = createFiberFromPortal(portal, returnFiber.mode, lanes);
created.return = returnFiber;
return created;
}有了下面 REACT_ELEMENT_TYPE 的解说，对于 REACT_PORTAL_TYPE 的源码就有肯定的思路了，如果还不晓得 ReactPortal 的作用
placeSingleChild
上述的不论是 REACT_ELEMENT_TYPE、REACT_PORTAL_TYPE、REACT_LAZY_TYPE 都是用了 placeSingleChild 包裹起来的，咱们来看一看他做了什么事件。
function placeSingleChild(newFiber: Fiber): Fiber {
// This is simpler for the single child case. We only need to do a
// placement for inserting new children.
if (shouldTrackSideEffects && newFiber.alternate === null) {newFiber.flags = Placement;}
return newFiber;
}那么这里咱们就发现了这个 shouldTrackSideEffects，还记得咱们在后面讲的ChildReconciler 函数的入参吗？他只是一个布尔。在挂载阶段 shouldTrackSideEffects:false，间接是return newFiber。不必要的标记减少性能开销。而在更新阶段，就必须要做这样的操作。Placement 为 dom 更新时的插入标记。
reconcileSingleTextNode
reconcileSingleTextNode的源码如下：
function reconcileSingleTextNode(returnFiber: Fiber, currentFirstChild: Fiber | null, textContent: string, lanes: Lanes,): Fiber {
// There's no need to check for keys on text nodes since we don't have a
// way to define them.
// 第一个子节点为文本类型
if (currentFirstChild !== null && currentFirstChild.tag === HostText) {
// We already have an existing node so let's just update it and delete
// the rest.
deleteRemainingChildren(returnFiber, currentFirstChild.sibling);
const existing = useFiber(currentFirstChild, textContent);
existing.return = returnFiber;
return existing;
}
// The existing first child is not a text node so we need to create one
// and delete the existing ones.
// 非文本类型打上标记，创立新的文本类型节点
deleteRemainingChildren(returnFiber, currentFirstChild);
const created = createFiberFromText(textContent, returnFiber.mode, lanes);
created.return = returnFiber;// 指向父级
return created;
}- 如果以后
fiber的第一个子节点的类型为文本类型，那么其所有的兄弟节点增加Deletion标记，通过useFiber复用以后fiber的子节点和textContent，并指向父级fiber。 - 如果不为文本类型，那么给旧的节点增加
Deletion标记，通过createFiberFromText创立新的文本类型节点，并指向父级fiber。
reconcileChildrenArray
下面的状况为 一对一 或者 多对一 的状况，那么如果是 一对多 或者 多对多 的状况就要用 reconcileChildrenArray 来解决了。
function reconcileChildrenArray(returnFiber: Fiber, currentFirstChild: Fiber | null, newChildren: Array<*>, lanes: Lanes,): Fiber | null {
// This algorithm can't optimize by searching from both ends since we
// don't have backpointers on fibers. I'm trying to see how far we can get
// with that model. If it ends up not being worth the tradeoffs, we can
// add it later.
// Even with a two ended optimization, we'd want to optimize for the case
// where there are few changes and brute force the comparison instead of
// going for the Map. It'd like to explore hitting that path first in
// forward-only mode and only go for the Map once we notice that we need
// lots of look ahead. This doesn't handle reversal as well as two ended
// search but that's unusual. Besides, for the two ended optimization to
// work on Iterables, we'd need to copy the whole set.
// In this first iteration, we'll just live with hitting the bad case
// (adding everything to a Map) in for every insert/move.
// If you change this code, also update reconcileChildrenIterator() which
// uses the same algorithm.
// 验证 key 是否非法
if (__DEV__) {
// First, validate keys.
let knownKeys = null;
for (let i = 0; i < newChildren.length; i++) {const child = newChildren[i];
knownKeys = warnOnInvalidKey(child, knownKeys, returnFiber);
}
}
// 要返回的第一个子 fiber 节点
let resultingFirstChild: Fiber | null = null;
let previousNewFiber: Fiber | null = null;
let oldFiber = currentFirstChild;
let lastPlacedIndex = 0;
let newIdx = 0;
let nextOldFiber = null;
// 解决更新状况
// 依据 oldFiber 的 index 和 newChildren 的下标，找到要比照更新的 oldFiber
for (; oldFiber !== null && newIdx < newChildren.length; newIdx++) {if (oldFiber.index > newIdx) {
nextOldFiber = oldFiber;
oldFiber = null;
} else {nextOldFiber = oldFiber.sibling;}
// 通过 updateSlot 来 diff 老的和新的子 fiber 节点，生成新的 fiber
const newFiber = updateSlot(
returnFiber,
oldFiber,
newChildren[newIdx],
lanes,
);
// 如果为 null 则阐明不可复用，退出第一轮循环
if (newFiber === null) {
// TODO: This breaks on empty slots like null children. That's
// unfortunate because it triggers the slow path all the time. We need
// a better way to communicate whether this was a miss or null,
// boolean, undefined, etc.
if (oldFiber === null) {oldFiber = nextOldFiber;}
break;
}
if (shouldTrackSideEffects) {if (oldFiber && newFiber.alternate === null) {
// We matched the slot, but we didn't reuse the existing fiber, so we
// need to delete the existing child.
deleteChild(returnFiber, oldFiber);
}
}
// 记录老的 fiber 的下标，并打上 PlaceMent 标记
lastPlacedIndex = placeChild(newFiber, lastPlacedIndex, newIdx);
if (previousNewFiber === null) {
// TODO: Move out of the loop. This only happens for the first run.
// 如果以后节点的上一个节点是 null，则示意以后节点为第一个节点，要返回进来
resultingFirstChild = newFiber;
} else {
// TODO: Defer siblings if we're not at the right index for this slot.
// I.e. if we had null values before, then we want to defer this
// for each null value. However, we also don't want to call updateSlot
// with the previous one.
// 如果不是则阐明不是第一个节点，须要持续解决其兄弟节点
previousNewFiber.sibling = newFiber;
}
previousNewFiber = newFiber;
oldFiber = nextOldFiber;
}
if (newIdx === newChildren.length) {
// We've reached the end of the new children. We can delete the rest.
// 如果 newChildren 遍历完了，则须要删除前面的所有旧的 fiber，打上 Deletion 标记
deleteRemainingChildren(returnFiber, oldFiber);
return resultingFirstChild;
}
if (oldFiber === null) {
// If we don't have any more existing children we can choose a fast path
// since the rest will all be insertions.
// 如果旧的遍历完了，新的还有那么这都是新增的，通过 createChild 创立新的节点
for (; newIdx < newChildren.length; newIdx++) {const newFiber = createChild(returnFiber, newChildren[newIdx], lanes);
if (newFiber === null) {continue;}
// 解决挪动的状况，给挪动的节点加上新增标记，插入到 fiber 链表树当中
lastPlacedIndex = placeChild(newFiber, lastPlacedIndex, newIdx);
if (previousNewFiber === null) {
// TODO: Move out of the loop. This only happens for the first run.
resultingFirstChild = newFiber;
} else {previousNewFiber.sibling = newFiber;}
previousNewFiber = newFiber;
}
return resultingFirstChild;
}
// Add all children to a key map for quick lookups.
// 如果新的老的都没有遍历结束，则须要解决成一个 map，老的 key 作为 key，新的 value 作为 value
const existingChildren = mapRemainingChildren(returnFiber, oldFiber);
// Keep scanning and use the map to restore deleted items as moves.
// 遍历剩下的 newChildren
for (; newIdx < newChildren.length; newIdx++) {
// 找到 mapRemainingChildren 中 key 相等的 fiber，复用 fiber 节点并更新 props
const newFiber = updateFromMap(
existingChildren,
returnFiber,
newIdx,
newChildren[newIdx],
lanes,
);
if (newFiber !== null) {if (shouldTrackSideEffects) {if (newFiber.alternate !== null) {
// The new fiber is a work in progress, but if there exists a
// current, that means that we reused the fiber. We need to delete
// it from the child list so that we don't add it to the deletion
// list.
// 如果以后的心得节点的指针为 null，则须要删除老的节点
existingChildren.delete(newFiber.key === null ? newIdx : newFiber.key,);
}
}
// 解决挪动 dom 状况，记录 index 并打上 PlaceMent 标记
lastPlacedIndex = placeChild(newFiber, lastPlacedIndex, newIdx);
// 将新创建的 fiber 插入到 fiber 链表树当中
if (previousNewFiber === null) {resultingFirstChild = newFiber;} else {previousNewFiber.sibling = newFiber;}
previousNewFiber = newFiber;
}
}
if (shouldTrackSideEffects) {
// Any existing children that weren't consumed above were deleted. We need
// to add them to the deletion list.
// 删除掉残余的 fiber 节点
existingChildren.forEach(child => deleteChild(returnFiber, child));
}
return resultingFirstChild;
}既然是多对多的这样的一个更新场景，那么就会呈现节点的减少、缩小、挪动等状况，因为大部分的理论场景中，节点更新的状况，往往比减少、缩小多得多，所以 React 优先解决了更新的状况。比照的对象为旧的 fiber 和 newChildren。
首先先对 newChildren 进行遍历，将以后的 oldFiber 与 以后 newIdx 下标的 newChild 通过 updateSlot 进行 diff。
updateSlot
function updateSlot(returnFiber: Fiber, oldFiber: Fiber | null, newChild: any, lanes: Lanes,): Fiber | null {
// Update the fiber if the keys match, otherwise return null.
const key = oldFiber !== null ? oldFiber.key : null;
// 如果是纯文本
if (typeof newChild === 'string' || typeof newChild === 'number') {
// Text nodes don't have keys. If the previous node is implicitly keyed
// we can continue to replace it without aborting even if it is not a text
// node.
if (key !== null) {return null;}
return updateTextNode(returnFiber, oldFiber, '' + newChild, lanes);
}
// 如果是对象
if (typeof newChild === 'object' && newChild !== null) {switch (newChild.$$typeof) {
case REACT_ELEMENT_TYPE: {if (newChild.key === key) {if (newChild.type === REACT_FRAGMENT_TYPE) {
return updateFragment(
returnFiber,
oldFiber,
newChild.props.children,
lanes,
key,
);
}
return updateElement(returnFiber, oldFiber, newChild, lanes);
} else {return null;}
}
case REACT_PORTAL_TYPE: {if (newChild.key === key) {return updatePortal(returnFiber, oldFiber, newChild, lanes);
} else {return null;}
}
case REACT_LAZY_TYPE: {if (enableLazyElements) {
const payload = newChild._payload;
const init = newChild._init;
return updateSlot(returnFiber, oldFiber, init(payload), lanes);
}
}
}
// 如果是数组或者可迭代的
if (isArray(newChild) || getIteratorFn(newChild)) {if (key !== null) {return null;}
return updateFragment(returnFiber, oldFiber, newChild, lanes, null);
}
throwOnInvalidObjectType(returnFiber, newChild);
}
if (__DEV__) {if (typeof newChild === 'function') {warnOnFunctionType(returnFiber);
}
}
return null;
}可见 updateSlot 函数解决与下面的单节点解决相似：
- 当
oldFiber与newChildren[newIdx]的key、type雷同，则阐明是能够复用的，依据oldFiber和newChild的props生成新的fiber，通过placeChild给新生成的fiber打上Placement副作用标记，同时新 fiber 与之前遍历生成的新 fiber 构建链表树关系。而后继续执行遍历，对下一个oldFiber和下一个newIdx下标的newFiber继续执行diff - 当
oldFiber与newChildren[newIdx]的key或type不雷同，阐明不可复用，返回 null，间接跳出遍历。
-
第一轮遍历完结后，可能会执行以下几种状况：
- 若
newChildren遍历完了，那剩下的oldFiber都是待删除的，通过deleteRemainingChildren对剩下的oldFiber打上Deletion副作用标记。 - 若
oldFiber遍历完了，那剩下的newChildren都是须要新增的，遍历剩下的newChildren，通过createChild创立新的fiber，placeChild给新生成的fiber打上Placement副作用标记并增加到fiber链表树中。 - 若
oldFiber和newChildren都未遍历完，通过mapRemainingChildren创立一个以剩下的oldFiber的key为key`oldFiber为value的map。而后对剩下的newChildren进行遍历，通过updateFromMap在map中寻找具备雷同key创立新的fiber(若找到则基于 oldFiber 和 newChild 的 props 创立，否则间接基于 newChild 创立)，则从map中删除以后的key，而后placeChild给新生成的fiber打上Placement副作用标记并增加到fiber链表树中。遍历完之后则existingChildren还剩下oldFiber的话，则都是待删除的 fiber，deleteChild对其打上Deletion` 副作用标记。
- 若
updateFromMap
function updateFromMap(existingChildren: Map<string | number, Fiber>, returnFiber: Fiber, newIdx: number, newChild: any, lanes: Lanes,): Fiber | null {if (typeof newChild === 'string' || typeof newChild === 'number') {
// Text nodes don't have keys, so we neither have to check the old nor
// new node for the key. If both are text nodes, they match.
const matchedFiber = existingChildren.get(newIdx) || null;
return updateTextNode(returnFiber, matchedFiber, '' + newChild, lanes);
}
if (typeof newChild === 'object' && newChild !== null) {switch (newChild.$$typeof) {
case REACT_ELEMENT_TYPE: {
const matchedFiber =
existingChildren.get(newChild.key === null ? newIdx : newChild.key,) || null;
if (newChild.type === REACT_FRAGMENT_TYPE) {
return updateFragment(
returnFiber,
matchedFiber,
newChild.props.children,
lanes,
newChild.key,
);
}
return updateElement(returnFiber, matchedFiber, newChild, lanes);
}
case REACT_PORTAL_TYPE: {
const matchedFiber =
existingChildren.get(newChild.key === null ? newIdx : newChild.key,) || null;
return updatePortal(returnFiber, matchedFiber, newChild, lanes);
}
case REACT_LAZY_TYPE:
if (enableLazyElements) {
const payload = newChild._payload;
const init = newChild._init;
return updateFromMap(
existingChildren,
returnFiber,
newIdx,
init(payload),
lanes,
);
}
}
if (isArray(newChild) || getIteratorFn(newChild)) {const matchedFiber = existingChildren.get(newIdx) || null;
return updateFragment(returnFiber, matchedFiber, newChild, lanes, null);
}
throwOnInvalidObjectType(returnFiber, newChild);
}
if (__DEV__) {if (typeof newChild === 'function') {warnOnFunctionType(returnFiber);
}
}
return null;
}updateFromMap与下面的函数逻辑相似，不再复述，reconcileChildrenArray的流程如下。
React 的 diff 策略
- 传统的 diff 算法的工夫复杂度为
O(n³)，是因为这种算法是以一棵树的一个节点比照另一棵树的所有节点的，这里为O(n²)，之后还须要再解决一次新生成的dom树，故而O(n³)是这么算进去的。 - 古代的 diff 算法的工夫复杂度为 O(n)，他是怎么算进去的呢？原来它采纳的是，
深度优先、同层比拟。就拿当初的MVVM框架来说吧，借助了vdom这样的一个概念，同层比拟在于比拟同一层的节点元素，不会呈现不同层之间比拟的状况。
上图为一般的两棵树，用来论述什么叫 同层级 比拟。
-
react中的diff策略，则体现为tree diff、component diff、element diff。tree diff：
如果把上图的dom树当做是current Fiber和workInProgress Fiber，那么从左到右的操作将会是- 在
C节点上面删除G节点。 - 在
A节点上面创立W节点。 - 在
E节点上面删除J节点。 - 在
F上面创立J节点。 component diff：组件之间的比拟，只会比拟他们的类型，如果上图右边的B节点的类型为div，左边的B节点类型为p，那么示意此节点不可复用，则进行的操作如下- 在
C节点上面删除G节点。 - 在
A节点上面创立W节点。 - 在
root上面创立B节点。 - 在
B节点上面创立E节点。 - 在
E节点上面创立I节点。 - 在
E节点上面删除J节点。 - 在
B几点上面创立F节点。 - 在
F节点上面创立J节点。 - 删除老的
B节点。 element diff：元素之间的比拟分为挪动、删除、新增，如果是上面的这样的例子，他将会进行这些操作。- 删除
A节点。 - 挪动
E节点到C节点之后。 - 创立
J节点插入到D节点之后。 - 删除
F节点。
总结
这一章讲述了，react的 diff 过程，也学习了 react 的diff策略，通过上述的解决之后就会走到 completeUnitWork，在这个过程中咱们会依据新生成的fiber 树去创立 dom 元素，依据其上的副作用 flags、effectLists 链表去做副作用的解决，在 commit 阶段的 commitMutationEffects 函数中进行实在 dom 的插入解决，下一章将讲述实在 dom 的生成