关于linux:记一次-Ubuntu-Linux-动态调整分区空间

用了一段时间后，发现 Ubuntu 空间太小了不够用了。于是扩容了硬盘大小，同时须要对分区进行调整来进行扩容。

零碎采纳的 LVM(Logical Volume Manager) 的形式进行治理的。

这里分两种状况进行解决：

LV(Logical Volume) 没有用尽 VG(Volume Group)。
VG(Volume Group) 没有用尽 PV(Physical Volume)，或者 PV(Physical Volume) 没有关联物理分区。

能够看到 / 由 /dev/mapper/ubuntu--vg-ubuntu--lv 挂载：

$ df -hl
Filesystem                         Size  Used Avail Use% Mounted on
tmpfs                              196M  1.4M  195M   1% /run
/dev/mapper/ubuntu--vg-ubuntu--lv  9.8G  7.5G  1.8G  81% /
tmpfs                              980M   16K  980M   1% /dev/shm
tmpfs                              5.0M     0  5.0M   0% /run/lock
/dev/sda2                          1.8G  127M  1.5G   8% /boot
tmpfs                              196M  4.0K  196M   1% /run/user/1000

ubuntu--vg-ubuntu--lv 应用的是 sda3 分区，而 sda3 总共 18.2G，ubuntu--vg-ubuntu--lv 只用了 10G:

$ sudo lsblk
NAME                      MAJ:MIN RM  SIZE RO TYPE MOUNTPOINTS
fd0                         2:0    1    4K  0 disk 
loop0                       7:0    0 79.9M  1 loop /snap/lxd/22923
loop1                       7:1    0   62M  1 loop /snap/core20/1587
loop2                       7:2    0   47M  1 loop /snap/snapd/16292
sda                         8:0    0   50G  0 disk 
├─sda1                      8:1    0    1M  0 part 
├─sda2                      8:2    0  1.8G  0 part /boot
└─sda3                      8:3    0 18.2G  0 part 
  └─ubuntu--vg-ubuntu--lv 253:0    0   10G  0 lvm  /

# VG ubuntu-vg 残余 8.22G
$ sudo vgdisplay -A
--- Volume group ---
VG Name               ubuntu-vg
System ID             
Format                lvm2
Metadata Areas        1
Metadata Sequence No  2
VG Access             read/write
VG Status             resizable
MAX LV                0
Cur LV                1
Open LV               1
Max PV                0
Cur PV                1
Act PV                1
VG Size               18.22 GiB
PE Size               4.00 MiB
Total PE              4665
Alloc PE / Size       2560 / 10.00 GiB
Free  PE / Size       2105 / 8.22 GiB
VG UUID               gHs11o-PLvl-3cw4-SIax-mcw6-7RCx-D4BEpo

两条命令调整 LV 占用 VG 的全副空间：

$ sudo lvextend -l +100%FREE /dev/ubuntu-vg/ubuntu-lv
$ sudo resize2fs /dev/ubuntu-vg/ubuntu-lv

后果，扩容胜利：

$ sudo lsblk
NAME                      MAJ:MIN RM  SIZE RO TYPE MOUNTPOINTS
fd0                         2:0    1    4K  0 disk 
loop0                       7:0    0 79.9M  1 loop /snap/lxd/22923
loop1                       7:1    0   62M  1 loop /snap/core20/1587
loop2                       7:2    0   47M  1 loop /snap/snapd/16292
sda                         8:0    0   50G  0 disk 
├─sda1                      8:1    0    1M  0 part 
├─sda2                      8:2    0  1.8G  0 part /boot
└─sda3                      8:3    0 18.2G  0 part 
  └─ubuntu--vg-ubuntu--lv 253:0    0 18.2G  0 lvm  /

这里以不损坏数据为前提，所以就不对原分区 /dev/sda3 进行调整了。而是采纳将磁盘可用空间创立一个新的 /dev/sda4 分区，而后去关联 VG，毕竟 LVM 非常灵活。

上面对新减少的 30GB 进行解决。

创立分区 sda4，将设置为 lvm 类型：

$ sudo fdisk /dev/sda
==> Command (m for help): p

Disk /dev/sda: 50 GiB, 53687091200 bytes, 104857600 sectors
Disk model: VMware Virtual S
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 3A0A0460-1FC2-46FF-A278-3299E8F2B745

Device       Start      End  Sectors  Size Type
/dev/sda1     2048     4095     2048    1M BIOS boot
/dev/sda2     4096  3719167  3715072  1.8G Linux filesystem
/dev/sda3  3719168 41940991 38221824 18.2G Linux filesystem

===> Command (m for help): n
Partition number (4-128, default 4): 
First sector (41940992-104857566, default 41940992): 
Last sector, +/-sectors or +/-size{K,M,G,T,P} (41940992-104857566, default 104857566): 

Created a new partition 4 of type 'Linux filesystem' and of size 30 GiB.

===> Command (m for help): p
Disk /dev/sda: 50 GiB, 53687091200 bytes, 104857600 sectors
Disk model: VMware Virtual S
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 3A0A0460-1FC2-46FF-A278-3299E8F2B745

Device        Start       End  Sectors  Size Type
/dev/sda1      2048      4095     2048    1M BIOS boot
/dev/sda2      4096   3719167  3715072  1.8G Linux filesystem
/dev/sda3   3719168  41940991 38221824 18.2G Linux filesystem
/dev/sda4  41940992 104857566 62916575   30G Linux filesystem

===> Command (m for help): t
===> Partition number (1-4, default 4): 
===> Partition type or alias (type L to list all): lvm

Changed type of partition 'Linux filesystem' to 'Linux LVM'.

===> Command (m for help): p
Disk /dev/sda: 50 GiB, 53687091200 bytes, 104857600 sectors
Disk model: VMware Virtual S
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 3A0A0460-1FC2-46FF-A278-3299E8F2B745

Device        Start       End  Sectors  Size Type
/dev/sda1      2048      4095     2048    1M BIOS boot
/dev/sda2      4096   3719167  3715072  1.8G Linux filesystem
/dev/sda3   3719168  41940991 38221824 18.2G Linux filesystem
/dev/sda4  41940992 104857566 62916575   30G Linux LVM

===> Command (m for help): w
The partition table has been altered.
Syncing disks.

能够看到 sda4 创立胜利，并应用所有可用空间：

$ sudo lsblk
NAME                      MAJ:MIN RM  SIZE RO TYPE MOUNTPOINTS
fd0                         2:0    1    4K  0 disk 
loop0                       7:0    0 79.9M  1 loop /snap/lxd/22923
loop1                       7:1    0   62M  1 loop /snap/core20/1587
loop2                       7:2    0   47M  1 loop /snap/snapd/16292
sda                         8:0    0   50G  0 disk 
├─sda1                      8:1    0    1M  0 part 
├─sda2                      8:2    0  1.8G  0 part /boot
├─sda3                      8:3    0 18.2G  0 part 
│ └─ubuntu--vg-ubuntu--lv 253:0    0 18.2G  0 lvm  /
└─sda4                      8:4    0   30G  0 part

将 sda4 创立成 PV(Physical Volume)：

$ sudo pvcreate /dev/sda4
  Physical volume "/dev/sda4" successfully created.

$ sudo pvdisplay
  --- Physical volume ---
  PV Name               /dev/sda3
  VG Name               ubuntu-vg
  PV Size               <18.23 GiB / not usable 3.00 MiB
  Allocatable           yes (but full)
  PE Size               4.00 MiB
  Total PE              4665
  Free PE               0
  Allocated PE          4665
  PV UUID               vO0lgC-X0bG-nUat-kevg-FONv-OpNh-qwY5zF
   
  "/dev/sda4" is a new physical volume of "30.00 GiB"
  --- NEW Physical volume ---
  PV Name               /dev/sda4
  VG Name               
  PV Size               30.00 GiB
  Allocatable           NO
  PE Size               0   
  Total PE              0
  Free PE               0
  Allocated PE          0
  PV UUID               A87gcC-J2mc-3jPD-4emh-8Ute-VQ52-Ceg7zu

将 sda4 扩容到以后的 VG：

# 查看以后 VG
$ sudo vgdisplay
  --- Volume group ---
  VG Name               ubuntu-vg
  System ID             
  Format                lvm2
  Metadata Areas        1
  Metadata Sequence No  3
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                1
  Open LV               1
  Max PV                0
  Cur PV                1
  Act PV                1
  VG Size               18.22 GiB
  PE Size               4.00 MiB
  Total PE              4665
  Alloc PE / Size       4665 / 18.22 GiB
  Free  PE / Size       0 / 0   
  VG UUID               gHs11o-PLvl-3cw4-SIax-mcw6-7RCx-D4BEpo

# 将 PV 增加到 VG
$ sudo vgextend ubuntu-vg /dev/sda4

# 扩大胜利
$ sudo vgdisplay
  --- Volume group ---
  VG Name               ubuntu-vg
  System ID             
  Format                lvm2
  Metadata Areas        2
  Metadata Sequence No  4
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                1
  Open LV               1
  Max PV                0
  Cur PV                2
  Act PV                2
  VG Size               <48.22 GiB
  PE Size               4.00 MiB
  Total PE              12344
  Alloc PE / Size       4665 / 18.22 GiB
  Free  PE / Size       7679 / <30.00 GiB
  VG UUID               gHs11o-PLvl-3cw4-SIax-mcw6-7RCx-D4BEpo

接下来就同 2.1 的操作了：

$ sudo lvextend -l +100%FREE /dev/ubuntu-vg/ubuntu-lv
$ sudo resize2fs /dev/ubuntu-vg/ubuntu-lv

$ sudo lsblk
NAME                      MAJ:MIN RM  SIZE RO TYPE MOUNTPOINTS
fd0                         2:0    1    4K  0 disk 
loop0                       7:0    0 79.9M  1 loop /snap/lxd/22923
loop1                       7:1    0   62M  1 loop /snap/core20/1587
loop2                       7:2    0   47M  1 loop /snap/snapd/16292
sda                         8:0    0   50G  0 disk 
├─sda1                      8:1    0    1M  0 part 
├─sda2                      8:2    0  1.8G  0 part /boot
├─sda3                      8:3    0 18.2G  0 part 
│ └─ubuntu--vg-ubuntu--lv 253:0    0 48.2G  0 lvm  /
└─sda4                      8:4    0   30G  0 part 
  └─ubuntu--vg-ubuntu--lv 253:0    0 48.2G  0 lvm  /

🌟 Github 原文地址

关于linux:记一次-Ubuntu-Linux-动态调整分区空间

1. 背景

2. 解决

2.1 LV 应用全副 VG

2.2 VG 关联物理分区进行扩容