1 模仿单机连贯瓶颈
咱们晓得,通常启动一个服务端会绑定一个端口,例如 8000 端口,当然客户端连贯端口是有限度的,除去最大端口 65535 和默认的 1024 端口及以下的端口,就只剩下 1 024~65 535 个,再扣除一些罕用端口,理论可用端口只有 6 万个左右。那么,咱们如何实现单机百万连贯呢? 假如在服务端启动 [8000,8100) 这 100 个端口,100×6 万就能够实现 600 万左右的连贯,这是 TCP 的一个基础知识,尽管对于客户端来说是同一个端口号,然而对于服务端来说是不同的端口号,因为 TCP 是一个私源组概念,也就是说它是由源 IP 地址、源端口号、目标 IP 地址和目标端口号确定的,当源 IP 地址和源端口号是一样的,然而目标端口号不一样,那么最终零碎底层会把它当作两条 TCP 连贯来解决,所以这里取巧给服务端开启了 100 个端口号,这就是单机百万连贯的筹备工作,如下图所示。
单机 1024 及以下的端口只能给 ROOT 保留应用,客户端端口范畴为 1025~65535,接下来用代码实现单机百万连贯的模仿场景。先看服务端类,循环开启 [8000~8100)这 100 个监听端口,期待客户端连贯。上面已 Netty 为例编写代码如下。
package com.tom.netty.connection;
import io.netty.bootstrap.ServerBootstrap;
import io.netty.channel.ChannelFuture;
import io.netty.channel.ChannelFutureListener;
import io.netty.channel.ChannelOption;
import io.netty.channel.EventLoopGroup;
import io.netty.channel.nio.NioEventLoopGroup;
import io.netty.channel.socket.nio.NioServerSocketChannel;
/**
* @author Tom
*/
public final class Server {
public static final int BEGIN_PORT = 8000;
public static final int N_PORT = 8100;
public static void main(String[] args) {new Server().start(Server.BEGIN_PORT, Server.N_PORT);
}
public void start(int beginPort, int nPort) {System.out.println("服务端启动中...");
EventLoopGroup bossGroup = new NioEventLoopGroup();
EventLoopGroup workerGroup = new NioEventLoopGroup();
ServerBootstrap bootstrap = new ServerBootstrap();
bootstrap.group(bossGroup, workerGroup);
bootstrap.channel(NioServerSocketChannel.class);
bootstrap.childOption(ChannelOption.SO_REUSEADDR, true);
bootstrap.childHandler(new ConnectionCountHandler());
for (int i = 0; i <= (nPort - beginPort); i++) {
final int port = beginPort + i;
bootstrap.bind(port).addListener(new ChannelFutureListener() {public void operationComplete(ChannelFuture channelFuture) throws Exception {System.out.println("胜利绑定监听端口:" + port);
}
});
}
System.out.println("服务端已启动!");
}
}
而后看 ConnectionCountHandler 类的实现逻辑,次要用来统计单位工夫内的申请数,每接入一个连贯则自增一个数字,每 2s 统计一次,代码如下。
package com.tom.netty.connection;
import io.netty.channel.ChannelHandler;
import io.netty.channel.ChannelHandlerContext;
import io.netty.channel.ChannelInboundHandlerAdapter;
import java.util.concurrent.Executors;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.atomic.AtomicInteger;
/**
* Created by Tom.
*/
@ChannelHandler.Sharable
public class ConnectionCountHandler extends ChannelInboundHandlerAdapter {private AtomicInteger nConnection = new AtomicInteger();
public ConnectionCountHandler() {Executors.newSingleThreadScheduledExecutor().scheduleAtFixedRate(new Runnable() {public void run() {System.out.println("以后客户端连接数:" + nConnection.get());
}
},0, 2, TimeUnit.SECONDS);
}
@Override
public void channelActive(ChannelHandlerContext ctx) {nConnection.incrementAndGet();
}
@Override
public void channelInactive(ChannelHandlerContext ctx) {nConnection.decrementAndGet();
}
}
再看客户端类代码,次要性能是循环顺次往服务端开启的 100 个端口发动申请,直到服务端无响应、线程挂起为止,代码如下。
package com.tom.netty.connection;
import io.netty.bootstrap.Bootstrap;
import io.netty.channel.*;
import io.netty.channel.nio.NioEventLoopGroup;
import io.netty.channel.socket.SocketChannel;
import io.netty.channel.socket.nio.NioSocketChannel;
/**
* Created by Tom.
*/
public class Client {
private static final String SERVER_HOST = "127.0.0.1";
public static void main(String[] args) {new Client().start(Server.BEGIN_PORT, Server.N_PORT);
}
public void start(final int beginPort, int nPort) {System.out.println("客户端已启动...");
EventLoopGroup eventLoopGroup = new NioEventLoopGroup();
final Bootstrap bootstrap = new Bootstrap();
bootstrap.group(eventLoopGroup);
bootstrap.channel(NioSocketChannel.class);
bootstrap.option(ChannelOption.SO_REUSEADDR, true);
bootstrap.handler(new ChannelInitializer<SocketChannel>() {
@Override
protected void initChannel(SocketChannel ch) {}});
int index = 0;
int port;
while (!Thread.interrupted()) {
port = beginPort + index;
try {ChannelFuture channelFuture = bootstrap.connect(SERVER_HOST, port);
channelFuture.addListener(new ChannelFutureListener() {public void operationComplete(ChannelFuture future) throws Exception {if (!future.isSuccess()) {System.out.println("连贯失败,程序敞开!");
System.exit(0);
}
}
});
channelFuture.get();} catch (Exception e) { }
if (port == nPort) {index = 0;}else {index ++;}
}
}
}
最初,将服务端程序打包公布到 Linux 服务器上,同样将客户端程序打包公布到另一台 Linux 服务器上。接下来别离启动服务端和客户端程序。运行一段时间之后,会发现服务端监听的连接数定格在一个值不再变动,如下所示。
以后客户端连接数: 870
以后客户端连接数: 870
以后客户端连接数: 870
以后客户端连接数: 870
以后客户端连接数: 870
以后客户端连接数: 870
以后客户端连接数: 870
以后客户端连接数: 870
以后客户端连接数: 870
...
并且抛出如下异样。
Exception in thread "nioEventLoopGroup-2-1" java.lang.InternalError: java.io.FileNotFoundException: /usr/java/jdk1.8.0_121/jre/lib/ext/cldrdata.jar (Too many open files)
at sun.misc.URLClassPath$JarLoader.getResource(URLClassPath.java:1040)
at sun.misc.URLClassPath.getResource(URLClassPath.java:239)
at java.net.URLClassLoader$1.run(URLClassLoader.java:365)
at java.net.URLClassLoader$1.run(URLClassLoader.java:362)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:361)
at java.lang.ClassLoader.loadClass(ClassLoader.java:424)
at java.lang.ClassLoader.loadClass(ClassLoader.java:411)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:331)
at java.lang.ClassLoader.loadClass(ClassLoader.java:357)
at java.util.ResourceBundle$RBClassLoader.loadClass(ResourceBundle.java:503)
at java.util.ResourceBundle$Control.newBundle(ResourceBundle.java:2640)
at java.util.ResourceBundle.loadBundle(ResourceBundle.java:1501)
at java.util.ResourceBundle.findBundle(ResourceBundle.java:1465)
at java.util.ResourceBundle.findBundle(ResourceBundle.java:1419)
at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:1361)
at java.util.ResourceBundle.getBundle(ResourceBundle.java:845)
at java.util.logging.Level.computeLocalizedLevelName(Level.java:265)
at java.util.logging.Level.getLocalizedLevelName(Level.java:324)
at java.util.logging.SimpleFormatter.format(SimpleFormatter.java:165)
at java.util.logging.StreamHandler.publish(StreamHandler.java:211)
at java.util.logging.ConsoleHandler.publish(ConsoleHandler.java:116)
at java.util.logging.Logger.log(Logger.java:738)
at io.netty.util.internal.logging.JdkLogger.log(JdkLogger.java:606)
at io.netty.util.internal.logging.JdkLogger.warn(JdkLogger.java:482)
at io.netty.util.concurrent.SingleThreadEventExecutor$5.run (SingleThreadEventExecutor.java:876)
at io.netty.util.concurrent.DefaultThreadFactory$DefaultRunnableDecorator.run (DefaultThreadFactory.java:144)
at java.lang.Thread.run(Thread.java:745)
这个时候,咱们就应该要晓得,这曾经是服务器所能承受客户端连贯数量的瓶颈值,也就是服务端最大反对 870 个连贯。接下来要做的事件是想方法冲破这个瓶颈,让单台服务器也能反对 100 万连贯,这是一件如许激动人心的事件。
2 单机百万连贯调优解决思路
2.1 冲破部分文件句柄限度
首先在服务端输出命令,看一下单个过程所能反对的最大句柄数。
ulimit -n
输出命令后,会呈现 1 024 的数字,示意 Linux 零碎中一个过程可能关上的最大文件数,因为开启一个 TCP 连贯就会在 Linux 零碎中对应创立一个文件,所以就是受这个文件的最大文件数限度。那为什么后面演示的服务端连接数最终定格在 870,比 1 024 小呢? 其实是因为除了连接数,还有 JVM 关上的文件 Class 类也算作过程内关上的文件,所以,1 024 减去 JVM 关上的文件数剩下的就是 TCP 所能反对的连接数。接下来想方法冲破这个限度,首先在服务器命令行输出以下命令,关上 /etc/security/limits.conf 文件。
sudo vi /etc/security/limits.conf
而后在这个文件开端加上上面两行代码。
* hard nofile 1000000
* soft nofile 1000000
后面的 * 示意以后用户,hard 和 soft 别离示意限度和正告限度,nofile 示意最大的文件数标识,前面的数字 1 000 000 示意任何用户都能关上 100 万个文件,这也是操作系统所能反对的最大值,如下图所示。
接下来,输出以下命令。
ulimit -n
这时候,咱们发现还是 1 024,没变,重启服务器。将服务端程序和客户端程序别离从新运行,这时候只需静静地察看连接数的变动,最终连接数停留在 137 920,同时抛出了异样,如下所示。
以后客户端连接数: 137920
以后客户端连接数: 137920
以后客户端连接数: 137920
以后客户端连接数: 137920
以后客户端连接数: 137920
Exception in thread "nioEventLoopGroup-2-1" java.lang.InternalError: java.io.FileNotFoundException: /usr/java/jdk1.8.0_121/jre/lib/ext/cldrdata.jar (Too many open files)
...
这又是为什么呢? 必定还有中央限度了连接数,想要冲破这个限度,就须要冲破全局文件句柄数的限度。
2.2 冲破全局文件句柄限度
首先在 Linux 命令行输出以下命令,能够查看 Linux 零碎所有用户过程所能关上的文件数。
cat /proc/sys/fs/file-max
通过下面这个命令能够看到全局的限度,发现失去的后果是 10 000。可想而知,部分文件句柄数不能大于全局的文件句柄数。所以,必须将全局的文件句柄数限度调大,冲破这个限度。首先切换为 ROOT 用户,不然没有权限。
sudo -s
echo 2000> /proc/sys/fs/file-max
exit
咱们改成 20 000 来测试一下,持续试验。别离启动服务端程序和客户端程序,发现连接数曾经超出了 20 000 的限度。
后面应用 echo 来配置 /proc/sys/fs/file-max 的话,重启服务器就会生效,还会变回原来的 10 000,因而,间接用 vi 命令批改,输出以下命令行。
sodu vi /etc/sysctl.conf
在 /etc/sysctl.conf 文件开端加上上面的内容。
fs.file-max=1000000
后果如下图所示。
接下来重启 Linux 服务器,再启动服务端程序和客户端程序。
以后客户端连接数: 9812451
以后客户端连接数: 9812462
以后客户端连接数: 9812489
以后客户端连接数: 9812501
以后客户端连接数: 9812503
...
最终连接数定格在 98 万左右。咱们发现次要受限于本机自身的性能。用 htop 命令查看一下,发现 CPU 都靠近 100%,如下图所示。
以上是操作系统层面的调优和性能晋升,上面次要介绍基于 Netty 利用层面的调优。
3 Netty 利用级别的性能调优
3.1 Netty 利用级别的性能瓶颈复现
首先来看一下利用场景,上面是一段规范的服务端利用程序代码。
package com.tom.netty.thread;
import io.netty.bootstrap.ServerBootstrap;
import io.netty.channel.*;
import io.netty.channel.nio.NioEventLoopGroup;
import io.netty.channel.socket.SocketChannel;
import io.netty.channel.socket.nio.NioServerSocketChannel;
import io.netty.handler.codec.FixedLengthFrameDecoder;
/**
* Created by Tom.
*/
public class Server {
private static final int port = 8000;
public static void main(String[] args) {EventLoopGroup bossGroup = new NioEventLoopGroup();
EventLoopGroup workerGroup = new NioEventLoopGroup();
final EventLoopGroup businessGroup = new NioEventLoopGroup(1000);
ServerBootstrap bootstrap = new ServerBootstrap();
bootstrap.group(bossGroup, workerGroup)
.channel(NioServerSocketChannel.class)
.childOption(ChannelOption.SO_REUSEADDR, true);
bootstrap.childHandler(new ChannelInitializer<SocketChannel>() {
@Override
protected void initChannel(SocketChannel ch) {
// 自定义长度的解码,每次发送一个 long 类型的长度数据
// 每次传递一个零碎的工夫戳
ch.pipeline().addLast(new FixedLengthFrameDecoder(Long.BYTES));
ch.pipeline().addLast(businessGroup, ServerHandler.INSTANCE);
}
});
ChannelFuture channelFuture = bootstrap.bind(port).addListener(new ChannelFutureListener() {public void operationComplete(ChannelFuture channelFuture) throws Exception {System.out.println("服务端启动胜利,绑定端口为:" + port);
}
});
}
}
咱们重点关注服务端的逻辑解决 ServerHandler 类。
package com.tom.netty.thread;
import io.netty.buffer.ByteBuf;
import io.netty.buffer.Unpooled;
import io.netty.channel.ChannelHandler;
import io.netty.channel.ChannelHandlerContext;
import io.netty.channel.SimpleChannelInboundHandler;
import java.util.concurrent.ThreadLocalRandom;
/**
* Created by Tom.
*/
@ChannelHandler.Sharable
public class ServerHandler extends SimpleChannelInboundHandler<ByteBuf> {public static final ChannelHandler INSTANCE = new ServerHandler();
//channelread0 是主线程
@Override
protected void channelRead0(ChannelHandlerContext ctx, ByteBuf msg) {ByteBuf data = Unpooled.directBuffer();
// 从客户端读一个工夫戳
data.writeBytes(msg);
// 模仿一次业务解决,有可能是数据库操作,也有可能是逻辑解决
Object result = getResult(data);
// 从新写回给客户端
ctx.channel().writeAndFlush(result);
}
// 模仿去数据库获取一个后果
protected Object getResult(ByteBuf data) {int level = ThreadLocalRandom.current().nextInt(1, 1000);
// 计算出每次响应须要的工夫,用来作为 QPS 的参考数据
//90.0% == 1ms 1000 100 > 1ms
int time;
if (level <= 900) {
time = 1;
//95.0% == 10ms 1000 50 > 10ms
} else if (level <= 950) {
time = 10;
//99.0% == 100ms 1000 10 > 100ms
} else if (level <= 990) {
time = 100;
//99.9% == 1000ms 1000 1 > 1000ms
} else {time = 1000;}
try {Thread.sleep(time);
} catch (InterruptedException e) { }
return data;
}
}
下面代码中有一个 getResult()办法。能够把 getResult()办法看作是在数据库中查问数据的一个办法,把每次查问的后果返回给客户端。实际上,为了模仿查问数据性能,getResult()传入的参数是由客户端传过来的工夫戳,最终返回的还是客户端传过来的值。只不过返回之前做了一次随机的线程休眠解决,以模仿实在的业务解决性能。如下表所示是模仿场景的性能参数。
上面来看客户端,也是一段规范的代码。
package com.tom.netty.thread;
import io.netty.bootstrap.Bootstrap;
import io.netty.channel.ChannelInitializer;
import io.netty.channel.ChannelOption;
import io.netty.channel.EventLoopGroup;
import io.netty.channel.nio.NioEventLoopGroup;
import io.netty.channel.socket.SocketChannel;
import io.netty.channel.socket.nio.NioSocketChannel;
import io.netty.handler.codec.FixedLengthFrameDecoder;
/**
* Created by Tom.
*/
public class Client {
private static final String SERVER_HOST = "127.0.0.1";
public static void main(String[] args) throws Exception {new Client().start(8000);
}
public void start(int port) throws Exception {EventLoopGroup eventLoopGroup = new NioEventLoopGroup();
final Bootstrap bootstrap = new Bootstrap();
bootstrap.group(eventLoopGroup)
.channel(NioSocketChannel.class)
.option(ChannelOption.SO_REUSEADDR, true)
.handler(new ChannelInitializer<SocketChannel>() {
@Override
protected void initChannel(SocketChannel ch) {ch.pipeline().addLast(new FixedLengthFrameDecoder(Long.BYTES));
ch.pipeline().addLast(ClientHandler.INSTANCE);
}
});
// 客户端每秒钟向服务端发动 1 000 次申请
for (int i = 0; i < 1000; i++) {bootstrap.connect(SERVER_HOST, port).get();}
}
}
从下面代码中看到,客户端会向服务端发动 1 000 次申请。重点来看客户端逻辑解决 ClientHandler 类。
package com.tom.netty.thread;
import io.netty.buffer.ByteBuf;
import io.netty.channel.ChannelHandler;
import io.netty.channel.ChannelHandlerContext;
import io.netty.channel.SimpleChannelInboundHandler;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.atomic.AtomicInteger;
import java.util.concurrent.atomic.AtomicLong;
/**
* Created by Tom.
*/
@ChannelHandler.Sharable
public class ClientHandler extends SimpleChannelInboundHandler<ByteBuf> {public static final ChannelHandler INSTANCE = new ClientHandler();
private static AtomicLong beginTime = new AtomicLong(0);
// 总响应工夫
private static AtomicLong totalResponseTime = new AtomicLong(0);
// 总申请数
private static AtomicInteger totalRequest = new AtomicInteger(0);
public static final Thread THREAD = new Thread(){
@Override
public void run() {
try {while (true) {long duration = System.currentTimeMillis() - beginTime.get();
if (duration != 0) {System.out.println("QPS:" + 1000 * totalRequest.get() / duration + "," + "均匀响应工夫:" + ((float) totalResponseTime.get()) / totalRequest.get() + "ms.");
Thread.sleep(2000);
}
}
} catch (InterruptedException ignored) {}}
};
@Override
public void channelActive(final ChannelHandlerContext ctx) {ctx.executor().scheduleAtFixedRate(new Runnable() {public void run() {ByteBuf byteBuf = ctx.alloc().ioBuffer();
// 将以后零碎工夫发送到服务端
byteBuf.writeLong(System.currentTimeMillis());
ctx.channel().writeAndFlush(byteBuf);
}
}, 0, 1, TimeUnit.SECONDS);
}
@Override
protected void channelRead0(ChannelHandlerContext ctx, ByteBuf msg) {
// 获取一个响应时间差,本次申请的响应工夫
totalResponseTime.addAndGet(System.currentTimeMillis() - msg.readLong());
// 每次自增
totalRequest.incrementAndGet();
if (beginTime.compareAndSet(0, System.currentTimeMillis())) {THREAD.start();
}
}
}
下面代码次要模仿了 Netty 实在业务环境下的解决耗时状况,QPS 大略在 1 000 次,每 2s 统计一次。接下来,启动服务端和客户端查看控制台日志。首先运行服务端,看到控制台日志如下图所示。
而后运行客户端,看到控制台日志如下图所示,一段时间之后,发现 QPS 放弃在 1 000 次以内,均匀响应工夫越来越长。
回到服务端 ServerHander 的 getResul()办法,在 getResult()办法中有线程休眠导致阻塞,不难发现,它最终会阻塞主线程,导致所有的申请挤压在一个线程中。如果把上面的代码放入线程池中,成果将齐全不同。
Object result =getResult(data);
ctx.channel().wrteAndFlush(result);
把这两行代码放到业务线程池里,一直在后盾运行,运行实现后即时返回后果。
3.2 Netty 利用级别的性能调优计划
上面来革新一下代码,在服务端的代码中新建一个 ServerThreadPoolHander 类。
package com.tom.netty.thread;
import io.netty.buffer.ByteBuf;
import io.netty.buffer.Unpooled;
import io.netty.channel.ChannelHandler;
import io.netty.channel.ChannelHandlerContext;
import java.util.concurrent.ExecutorService;
import java.util.concurrent.Executors;
/**
* Created by Tom.
*/
@ChannelHandler.Sharable
public class ServerThreadPoolHandler extends ServerHandler {public static final ChannelHandler INSTANCE = new ServerThreadPoolHandler();
private static ExecutorService threadPool = Executors.newFixedThreadPool(1000);
@Override
protected void channelRead0(final ChannelHandlerContext ctx, ByteBuf msg) {final ByteBuf data = Unpooled.directBuffer();
data.writeBytes(msg);
threadPool.submit(new Runnable() {public void run() {Object result = getResult(data);
ctx.channel().writeAndFlush(result);
}
});
}
}
而后在服务端的 Handler 解决注册为 ServerThreadPoolHander,删除原来的 ServerHandler,代码如下。
ch.pipeline().addLast(ServerThreadPoolHandler.INSTANCE);
随后,启动服务端和客户端程序,查看控制台日志,如下图所示。
最终耗时稳固在 15ms 左右,QPS 也超过了 1 000 次。实际上这个后果还不是最优的状态,持续调整。将 ServerThreadPoolHander 的线程个数调整到 20,代码如下。
而后启动程序,发现均匀响应工夫相差也不是太多,如下图所示。
由此得出的论断是:具体的线程数须要在实在的环境下一直地调整、测试,能力确定最合适的数值。本章旨在通知大家优化的办法,而不是后果。
本篇由 Tom 老师分享,如果本文对您有帮忙,欢送关注和点赞!