SIT232 Object‐Oriented Development Trimester 1, 2021
1
Practical Task 5.3
(Distinction Task)
Submission deadline: 10:00am Monday, May 17
Discussion deadline: 10:00pm Friday, May 28
General Instructions
In object‐oriented design, a pattern is a general repeatable solution to a commonly occurring problem. It is
not a finished design that can be transformed directly into code, but rather a description or template for how
to solve a problem that can be used in many different situations. Effective software design requires
considering issuesthat may not become visible until later in the implementation. Design patterns can handle
such issues and speed up development process by providing tested, proven development paradigms.
This practical task introduces you to the State Design Pattern and make you familiar with problems posed
by event‐driven systems. The state pattern is close to the concept of finite‐state machines and allows an
object to alter its behaviour as its internal state changes. It can be interpreted as a strategy pattern, which is
able to switch a strategy through invocations of methods defined in the pattern’s interface. This pattern
helps to achieve the following.
It makes a class independent of how state‐specific behaviour is implemented.
It enables to add new states by defining new state classes.
It allows to change the class’s behaviour at run‐time by changing its current state object.
Indeed, implementing state‐specific behaviour directly within a classisinflexible because it commitsthe class
to a particular behaviour and makes it impossible to add a new state or change the behaviour of an existing
state later independently from (without changing) the class. The state pattern overcomes this challenge.
First, it defines separate (state) objects that encapsulate state‐specific behaviour for each state. This implies
an interface (state) for performing state‐specific behaviour. It then defines classes that implement the
interface for each state. Second, it ensures that a class delegates state‐specific behaviour to its current state
object instead of implementing state‐specific behaviour directly.
Now, let’sfocus on the task description. Imagine that you have been hired by an electronics company to build
a software for a simple Reaction‐Timer game. The Reaction‐Timer machine has two inputs:
a coin‐slot that starts the game and
a Go/Stop button that controls it.
There is also a display that indicates to the player what he/she should do next. The machine must behave as
follows.
Initially, the display shows‘Insert coin’, and the machine waits for the player to do so.
When the player inserts a coin, the machine displays‘Press GO!’and waits for the player to do so.
When the player presses the Go/Stop button, the machine displays‘Wait…’for a random time between
1.0 and 2.5 seconds. After the random delay expires, the machine displays a time‐value that increments
every 10 milliseconds,starting atzero. The player must now pressthe Go/Stop button assoon as possible
– the goal of the game is to show fast reactions! If the player presses the Go/Stop button during the
random delay period, i.e. the player tries to“guess”when the delay will expire, the machine aborts the
game and immediately demands another coin. To put it simply, there is no reward for trying to cheat! If
the user has not pressed stop after two seconds, the machine will stop automatically – no living person
could be that slow!
SIT232 Object‐Oriented Development Trimester 1, 2021
2
Whether the player has pressed the Go/Stop button within the two seconds waiting time period or not,
the machine displays the final timer value for three seconds, then the game is over until another coin is
inserted. If the player presses the Go/Stop button while the measured reaction time is being displayed,
the machine immediately displays‘Insert coin’.
- Start with exploring the two provided templates for the program that you will need to write. You are free
to select any of these two. The first option is a Windows Forms application, which issuitable for MS Visual
Studio on Windows platform. The second option is a Console Application, which is cross‐platform and
appropriate for both MS Visual Studio and Visual Studio Code. Regardless the template you will select,
your program must consist of the following parts.
A main program module, which is ready for you and provided in the SimpleReactionMachine.cs file.
This module emulates the Reaction‐Timer machine itself and serves as a base to test and use the
controller that is a part of your particular task. The controller will drive the machine.
A GUI component for the Reaction‐Timer machine, which is also ready and provided. Its configuration
depends on the template you will select. In both cases, it includes a button labelled‘Coin inserted’and
a button labelled‘Go/Stop’. It also has a display region to show the messages of the machine. The GUI
conforms to the IGui interface.
Simple Reaction Controller is the module that you will need to implement. This is the main part of the
exercise. You are free to write this component in any way you choose if it implements the required
IController interface. Specifically, yourtask isto add a SimpleReactionController.cs source code
file and complete a new SimpleReactionController class that functions as prescribed for the
Reaction‐Timer machine above. The IController interface is included in the templates. - Spend some time to elaborate on how the Reaction‐Timer machine as an event‐driven system should act.
Explore the notes on the implementation of finite‐state machines (FSM), of which the Reaction‐Timer
machine is an example. Here, we refer to the book chapter attached to the project.
To proceed to the next step, you should first complete the design of the system by building what is called
as a state‐transition diagram. The attached document has a number of very similar examples and will
guide you in decision making on the number of required states and their properties as well as possible
transitions. This step is crucial as the translation from the diagram to a program code is quite
straightforward, sure if your diagram is correct. Certainly, many programmers are tempted to say“I can
get this right without a FSM”. Unfortunately, this statement is rarely true. Most often, the program that
results will be hard to understand, hard to modify, and will not be correct. The document will try to
convince you of the advantage of FSMs. It explains how to convert the correct design into errorless code. - If you trust your design and it meets the machine’s specification, it is time to think about the code you
will need to write. Again, we refer to the attached document and examples that it describes. Some video
materials referred at the bottom of this task sheet will also help you with the structure of the correct
implementation. You should know what you are going to write before you start. Focus on the use of the
given IController interface and exploit the dynamic‐dispatch mechanism that eliminates the need for
the switch statement. In addition, search and read about implementation of so‐called nested (also called
inner) classes in C# that allow to define a class within another class. This will allow you to strengthen
encapsulation in your program and manipulate the states. - It is finally the time for coding. If you prefer to build a console application, import the files from the
‘SimpleReactionMachine Console’directory. If your choice is a Windows Forms application, then open
the existing project from‘SimpleReactionMachine WinForms’, which will ask you to add the missing
SimpleReactionController.cs file to the prepared project. In both cases, you will face compilation errors
due to the lack of the required source code file. Therefore, add the SimpleReactionController class
and make sure that it implements the IController interface and contains the following methods.
SIT232 Object‐Oriented Development Trimester 1, 2021
3
void Connect(IGui gui, IRandom rng);
Connectsthe controller to the specified GUI component, which implementsthe IGui interface, and the specified
random number generator.
void Init();
Initialises the controller.
void CoinInserted();
Reacts on the insertion of a coin into the machine.
void GoStopPressed();
Reacts on the pressing of the Go/Stop button of the machine.
void Tick();
Reacts on the Tick event addressed to the controller.
Obviously, your controller needs a source of timing information. You must obtain this information by
implementing the Tick method in your controller. The main SimpleReactionMachine class guarantees
to call this method every 10 milliseconds. Do not use any other timer. Furthermore, your controller also
needs a source of random numbers. You must obtain your random numbers by calling the GetRandom()
method of the provided generator. Do not use the Random class. Note that time must be displayed with
two decimal places. For example, a value of 1.5 seconds must be shown as 1.50. -
As you progress with the implementation of the SimpleReactionController class, you should start
using the Tester class from the‘SimpleReactionMachine Tester’directory of the project. It will allow
you to thoroughly test the class you are developing aiming on the coverage of all potential logical issues
and runtime errors. This(testing) part of the task is asimportant as writing the controller itself. To activate
testing, make a separate Console Application project using the files in the‘SimpleReactionMachine
Tester’and import your current version of the SimpleReactionMachine class. Explore the Tester class
to get details of the tests we prepared for you and the sequence that they are applied. If you fail a test,
then the logic (behaviour) of your controller is incorrect.
The following displays the expected printout produced by the attached Tester, specifically by its Main
method.
test A: passed successfully
test B: passed successfully
test C: passed successfully
test D: passed successfully
test E: passed successfully
test F: passed successfully
test G: passed successfully
test H: passed successfully
test I: passed successfully
test J: passed successfully
test K: passed successfully
test L: passed successfully
test M: passed successfully
test N: passed successfully
test O: passed successfully
test P: passed successfully
test Q: passed successfully
test R: passed successfully
test S: passed successfully
test T: passed successfully
test U: passed successfully
test V: passed successfully
test W: passed successfully
test X: passed successfully
test Y: passed successfully
SIT232 Object‐Oriented Development Trimester 1, 2021
4
test Z: passed successfully
test a: passed successfully
test b: passed successfully
test c: passed successfully
test d: passed successfully
test e: passed successfully
test f: passed successfully
test g: passed successfully
test h: passed successfully
test i: passed successfully
test j: passed successfully
test k: passed successfullytest l: passed successfully
Summary: 38 tests passed out of 38
- Finally, remember that this task is primarily about object‐oriented design rather than pure coding. If you
follow the instructions, your code should not be longer than (approximately) 200 lines. This is how long
our solution is. Our past experience says that students coding without design will likely end up with
several times longer code, which is usually messy and inefficient because of many plugs and conditional
statements.
Further Notes
Explore the attached book chapter entitled“Notes on Finite State Machines”to learn about the concepts
you will need to complete this project correctly. Especially, focus on the examples of the state‐transition
diagrams as they will help you sketch your FSM.
The following video materials will give you more insights on the finite state machines, their relevance to
the state design pattern, and how to implement the pattern in code.
To get your task completed, you must finish the following steps strictly on time.
Make sure that your programsimplement the required functionality. They must compile and have no runtime errors.
Programs causing compilation or runtime errors will not be accepted as a solution. You need to test your programs
thoroughly before submission. Think about potential errors where your programs might fail.
Submit the expected code files as a solution to the task via OnTrack submission system.
Once your code solution is accepted by the tutor, you will be invited to continue its discussion and answer relevant
theoretical questions through a face‐to‐face interview with your marking tutor. Specifically, you will need to meet
with the tutor to demonstrate and discuss the accepted solution in one of the dedicated practical sessions (run
online via MS Teams for cloud students and organised as an on‐campus practical for students who selected to join
SIT232 Object‐Oriented Development Trimester 1, 2021
5
classes at Burwood or Geelong). Be on time with respect to the specified discussion deadline. Please, come prepared
so that the class time is used efficiently and fairly for all students in it.
You will also need to answer all additional questions that your tutor may ask you. Questions will cover the lecture
notes;so attending (or watching) the lecturesshould help you with this compulsory discussion part. You should start
the discussion as soon as possible as if your answers are wrong, you may have to pass another round, still before the
deadline. Use available attempts properly.
Note that we will not accept your solution after the submission deadline and will not discuss it after the discussion
deadline. If you fail one of the deadlines, you fail the task and this reduces the chance to pass the unit. Unless extended
for all students, the deadlines are strict to guarantee smooth and on‐time work throughout the unit.
Remember that this is your responsibility to keep track of your progress in the unit that includes checking which tasks
have been marked as completed in the OnTrack system by your marking tutor, and which are still to be finalised. When
marking you at the end of the unit, we will solely rely on the records of the OnTrack system and feedback provided by
your tutor about your overall progress and the quality of your solutions.