关于golang:golang调度学习调度流程-三-wakep-startm

本文次要讲 wakep startm
wakep 在 newproc 可能会调用（main 起来之后）会调用 wakep
startm 在 wakep 中调用
mstart 在 rt0_go 中调用，执行 main
零碎线程 m

主线程：golang 程序启动加载的时候就运行在主线程上，代码中由一个全局的 m0 示意
运行 sysmon 的线程
普通用户线程，用来与 p 绑定，运行 g 中的工作的线程，
主线程和运行 sysmon 都是单实例，独自一个线程。而用户线程会有很多事例，他会依据调度器的需要新建，休眠和唤醒。

// Tries to add one more P to execute G's.
// Called when a G is made runnable (newproc, ready).
// 增加一个闲置的 p 来执行 g
func wakep() {if atomic.Load(&sched.npidle) == 0 {                        // 没有限度的 g, 返回
        return
    }
    // be conservative about spinning threads
    if atomic.Load(&sched.nmspinning) != 0 || !atomic.Cas(&sched.nmspinning, 0, 1) {    // 
        return
    }
    startm(nil, true)
}

// Schedules some M to run the p (creates an M if necessary).
// If p==nil, tries to get an idle P, if no idle P's does nothing.
// May run with m.p==nil, so write barriers are not allowed.
// If spinning is set, the caller has incremented nmspinning and startm will
// either decrement nmspinning or set m.spinning in the newly started M.
//
// Callers passing a non-nil P must call from a non-preemptible context. See
// comment on acquirem below.
//
// Must not have write barriers because this may be called without a P.
// 调度一些 M 去运行 P
// 如果 p 不存在则从缓存获取 P，没有 P 就返回
// 如果 spinning 是 true，那个相应的 startm 须要减去 nmspinning
// 如果调用者调用含有非空 p，那么 Callers 就不能被抢占

//go:nowritebarrierrec
func startm(_p_ *p, spinning bool) {
    // Disable preemption.
    //
    // Every owned P must have an owner that will eventually stop it in the
    // event of a GC stop request. startm takes transient ownership of a P
    // (either from argument or pidleget below) and transfers ownership to
    // a started M, which will be responsible for performing the stop.
    // 每个领有的 P 必须具备一个所有者，该所有者将在 GC 申请终止的状况下最终将其进行。// startm 获得 P 的长期所有权（从上面的参数或 pidleget 中获取），并将所有权转移给已启动的 M，该 M 将负责执行进行。//
    // Preemption must be disabled during this transient ownership,
    // otherwise the P this is running on may enter GC stop while still
    // holding the transient P, leaving that P in limbo and deadlocking the
    // STW.
    // 在此短暂所有权期间，必须禁用抢占，否则正在运行的 P 可能会在依然放弃该暂态 P 的同时进入 GC 进行，// 从而使该 P 处于混乱状态并使 STW 死锁。// Callers passing a non-nil P must already be in non-preemptible
    // context, otherwise such preemption could occur on function entry to
    // startm. Callers passing a nil P may be preemptible, so we must
    // disable preemption before acquiring a P from pidleget below.
    // 传递非 nil P 的调用者必须曾经在不可抢占的上下文中，否则这种抢占可能产生在向进入 startm 的函数时。// 传递 nil P 的调用者可能是可抢占的，因而在从上面的 pidleget 获取 P 之前，咱们必须先禁用抢占。mp := acquirem()                                    // 禁止抢占
    lock(&sched.lock)
    if _p_ == nil {_p_ = pidleget()
        if _p_ == nil {                                 // 没有闲暇的 p 了，只能回去了                          
            unlock(&sched.lock)
            if spinning {
                // The caller incremented nmspinning, but there are no idle Ps,
                // so it's okay to just undo the increment and give up.
                if int32(atomic.Xadd(&sched.nmspinning, -1)) < 0 {throw("startm: negative nmspinning")
                }
            }
            releasem(mp)                            // 能够抢占了
            return
        }
    }
    nmp := mget()                                   // 获取一个全局闲暇的 m
    if nmp == nil {                                 // 没有闲暇的 m 了
        // No M is available, we must drop sched.lock and call newm.
        // However, we already own a P to assign to the M.
        //
        // Once sched.lock is released, another G (e.g., in a syscall),
        // could find no idle P while checkdead finds a runnable G but
        // no running M's because this new M hasn't started yet, thus
        // throwing in an apparent deadlock.
        //
        // Avoid this situation by pre-allocating the ID for the new M,
        // thus marking it as 'running' before we drop sched.lock. This
        // new M will eventually run the scheduler to execute any
        // queued G's.
        id := mReserveID()
        unlock(&sched.lock)

        var fn func()
        if spinning {
            // The caller incremented nmspinning, so set m.spinning in the new M.
            fn = mspinning
        }
        newm(fn, _p_, id)                   //  简略新建一个 m，就能够回去了
        // Ownership transfer of _p_ committed by start in newm.
        // Preemption is now safe.
        releasem(mp)                        // 开释以后 g 的 m，能够被抢占了
        return
    }
    unlock(&sched.lock)
    if nmp.spinning {throw("startm: m is spinning")
    }
    if nmp.nextp != 0 {throw("startm: m has p")
    }
    if spinning && !runqempty(_p_) {throw("startm: p has runnable gs")
    }
    // The caller incremented nmspinning, so set m.spinning in the new M.
    nmp.spinning = spinning             // 标记该 M 是否在自旋
    nmp.nextp.set(_p_)                  // 暂存 P
    notewakeup(&nmp.park)               // 唤醒 M
    // Ownership transfer of _p_ committed by wakeup. Preemption is now
    // safe.
    releasem(mp)
}

startm 次要实现工作:

如果_p_为空就获取缓存的_p_
如果没有闲暇的 m, new 一个 m 并且初始化 m, 包含创立 go 和 gsignal, 新建零碎线程，并且在下面执行 mstart

如果有闲暇的 m, 唤醒 m

// Create a new m. It will start off with a call to fn, or else the scheduler.
// fn needs to be static and not a heap allocated closure.
// May run with m.p==nil, so write barriers are not allowed.
//
// id is optional pre-allocated m ID. Omit by passing -1.
//go:nowritebarrierrec
func newm(fn func(), _p_ *p, id int64) {mp := allocm(_p_, fn, id)                   // new 一个 m 并且初始化 m, 包含创立 go 和 gsignal
mp.doesPark = (_p_ != nil)                  // m 是否应该挂起，P!=nil 就能够间接用 p 执行了 就不必挂起了
mp.nextp.set(_p_)
mp.sigmask = initSigmask 
if gp := getg(); gp != nil && gp.m != nil && (gp.m.lockedExt != 0 || gp.m.incgo) && GOOS != "plan9" {
    // We're on a locked M or a thread that may have been
    // started by C. The kernel state of this thread may
    // be strange (the user may have locked it for that
    // purpose). We don't want to clone that into another
    // thread. Instead, ask a known-good thread to create
    // the thread for us.
    //
    // This is disabled on Plan 9. See golang.org/issue/22227.
    //
    // TODO: This may be unnecessary on Windows, which
    // doesn't model thread creation off fork.
    lock(&newmHandoff.lock)
    if newmHandoff.haveTemplateThread == 0 {throw("on a locked thread with no template thread")
    }
    mp.schedlink = newmHandoff.newm
    newmHandoff.newm.set(mp)
    if newmHandoff.waiting {
        newmHandoff.waiting = false
        notewakeup(&newmHandoff.wake)
    }
    unlock(&newmHandoff.lock)
    return
}
// 关联真正的调配 os thread
// 调配一个零碎线程，且实现 g0 上的栈调配
// 传入 mstart 函数，让线程执行 mstart
newm1(mp)
}

newm 的次要工作:

new 一个 m 并且初始化 m, 包含创立 go 和 gsignal
初始化一些参数

新建一个零碎线程并且执行 mstart

func newm1(mp *m) {
if iscgo {
    var ts cgothreadstart
    if _cgo_thread_start == nil {throw("_cgo_thread_start missing")
    }
    ts.g.set(mp.g0)
    ts.tls = (*uint64)(unsafe.Pointer(&mp.tls[0]))
    ts.fn = unsafe.Pointer(funcPC(mstart))
    if msanenabled {msanwrite(unsafe.Pointer(&ts), unsafe.Sizeof(ts))
    }
    execLock.rlock() // Prevent process clone.
    asmcgocall(_cgo_thread_start, unsafe.Pointer(&ts))
    execLock.runlock()
    return
}
execLock.rlock() // Prevent process clone.
newosproc(mp)
execLock.runlock()}

Linux newosproc

// May run with m.p==nil, so write barriers are not allowed.
//go:nowritebarrier
func newosproc(mp *m) {
// 调配一个零碎线程，且实现 g0 上的栈调配
// 传入 mstart 函数，让线程执行 mstart
stk := unsafe.Pointer(mp.g0.stack.hi)
/*
 * note: strace gets confused if we use CLONE_PTRACE here.
 */
if false {print("newosproc stk=", stk, "m=", mp, "g=", mp.g0, "clone=", funcPC(clone), "id=", mp.id, "ostk=", &mp, "\n")
}

// Disable signals during clone, so that the new thread starts
// with signals disabled. It will enable them in minit.
var oset sigset
sigprocmask(_SIG_SETMASK, &sigset_all, &oset)
ret := clone(cloneFlags, stk, unsafe.Pointer(mp), unsafe.Pointer(mp.g0), unsafe.Pointer(funcPC(mstart)))
sigprocmask(_SIG_SETMASK, &oset, nil)

if ret < 0 {print("runtime: failed to create new OS thread (have", mcount(), "already; errno=", -ret, ")\n")
    if ret == -_EAGAIN {println("runtime: may need to increase max user processes (ulimit -u)")
    }
    throw("newosproc")
}
}

Windows newosproc

// May run with m.p==nil, so write barriers are not allowed. This
// function is called by newosproc0, so it is also required to
// operate without stack guards.
//go:nowritebarrierrec
//go:nosplit
func newosproc(mp *m) {
// 调配一个零碎线程，且实现 g0 和 g0 上的栈调配
// 传入 mstart 函数，让线程执行 mstart
// We pass 0 for the stack size to use the default for this binary.
thandle := stdcall6(_CreateThread, 0, 0,
    funcPC(tstart_stdcall), uintptr(unsafe.Pointer(mp)),
    0, 0)

if thandle == 0 {if atomic.Load(&exiting) != 0 {
        // CreateThread may fail if called
        // concurrently with ExitProcess. If this
        // happens, just freeze this thread and let
        // the process exit. See issue #18253.
        lock(&deadlock)
        lock(&deadlock)
    }
    print("runtime: failed to create new OS thread (have", mcount(), "already; errno=", getlasterror(), ")\n")
    throw("runtime.newosproc")
}

// Close thandle to avoid leaking the thread object if it exits.
stdcall1(_CloseHandle, thandle)
}

调配一个 m，且不关联任何一个 os thread

// Allocate a new m unassociated with any thread.
// Can use p for allocation context if needed.
// fn is recorded as the new m's m.mstartfn.
// id is optional pre-allocated m ID. Omit by passing -1.
//
// This function is allowed to have write barriers even if the caller
// isn't because it borrows _p_.
//
//go:yeswritebarrierrec
func allocm(_p_ *p, fn func(), id int64) *m {_g_ := getg()
acquirem() // disable GC because it can be called from sysmon
if _g_.m.p == 0 {           // 为什么会可能没有绑定 p 呢
    // 把__p__和 g.m 互相绑定，并且把_p_.status 从_Pidle 转为_Prunning
    acquirep(_p_) // temporarily borrow p for mallocs in this function
}

// Release the free M list. We need to do this somewhere and
// this may free up a stack we can use.
// mexit 的时候会加到 freem, m.gsignal 会在那时候开释，这个构造
// 因为 m 是又 new 创立的，能够由 gc 开释
if sched.freem != nil {lock(&sched.lock)
    var newList *m
    for freem := sched.freem; freem != nil; {
        if freem.freeWait != 0 {
            next := freem.freelink
            freem.freelink = newList
            newList = freem
            freem = next
            continue
        }
        // stackfree must be on the system stack, but allocm is
        // reachable off the system stack transitively from
        // startm.
        systemstack(func() {stackfree(freem.g0.stack)
        })
        freem = freem.freelink
    }
    sched.freem = newList
    unlock(&sched.lock)
}

mp := new(m)
mp.mstartfn = fn
mcommoninit(mp, id)  // 在文章（一）有介绍，次要是创立 gsignal，并且把 m 退出 allm

// In case of cgo or Solaris or illumos or Darwin, pthread_create will make us a stack.
// Windows and Plan 9 will layout sched stack on OS stack.
// 创立 g0
if iscgo || mStackIsSystemAllocated() {mp.g0 = malg(-1)
} else {mp.g0 = malg(8192 * sys.StackGuardMultiplier)
}
mp.g0.m = mp

if _p_ == _g_.m.p.ptr() {releasep()              // 互相_g_.m 和__p__互相解绑
}
releasem(_g_.m)             // 能够抢占

return mp
}

_P_的作用是_g_.m 为空的时候借用来申请堆内存的, 借完_p_.status 设置成_Pidle 并且还回去
allocm 次要实现一下工作:

new 一个 m 并且初始化 m, 包含创立 go 和 gsignal

[1] Go 语言底细（6）：启动和内存调配初始化 https://studygolang.com/artic…

关于golang:golang调度学习调度流程-三-wakep-startm

在 golang 中有三种零碎线程：

wakep startm

newm

allocm

援用文章

Just My Socks（注册教程内含优惠码）

关于golang:golang调度学习调度流程-三-wakep-startm

在 golang 中有三种零碎线程：

wakep startm

newm

allocm

援用文章

Just My Socks（注册教程 内含优惠码）

Just My Socks（注册教程内含优惠码）